FOB Price
Get Latest Price( Negotiable )
|Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
100 Set
Packaging Detail:
-
Delivery Time:
-
Supplying Ability:
-
Payment Type:
Western Union, L/C, T/T
連絡先担当者 Ms. Yan
No.9,Xingye Road,Torch Hi-tech Industrial Zone, Zhongshan, Guangdong
| Solar panel type | Monocrystalline |
| Wattage | **0W |
| Voltage | *3.***4.*3V |
| Open circuit voltage | *2.4V |
| Peak current output | 8.*5A |
| Regulator type | PWM (Pulse-Width Modulator) |
| Dimensions | **0***0**5mm |
| Extension lead | 5m |
| Solar regulator IP Rating | IP*8 |
l Highly efficient monocrystalline modules in the solar panel guarantee efficient charging.
l When the **0W folding solar panel is folded up, its space-saving and portable; when the folding solar kit is open, it has double the sunlight charging area, providing a good consistent charge.
l The regulator is designed to protect the battery from overcharging under voltage, as well as short circuiting.
l Specially
designed support legs enable the**0W folding solar panel to stand
on rough surfaces, and on a desired angle for direct sun
exposure.
USING YOUR **0W FOLDING SOLAR
PANEL:
The Adventure Kings **0W folding solar panel
will perform at its peak when the solar panel face/monocrystalline
cells are angled directly towards the sun. Set the legs to your
desired position:(below)
TWO STEPS FOR USING THIS
ADJUSTABLE SUPPORT LEG
l When the locking handle is at *0 degrees a
right angle. The support legs are loose and the angle of the solar
panel can be adjusted.
l When the locking handle is in the down (*5
degree) position, the support legs are locked and cannot move or
shake at all.
CONNECTING YOUR SOLAR
PANEL
l Now that the panel is setup facing directly
towards the sun. Proceed to connect the positive and negative
clamps to your battery.
l DO NOT connect the solar panel straight to the
battery or it will damage the Solar controller.
l Always connect the battery clamps to the
battery first, then plug the solar panel Anderson plug into the
battery cables Anderson plug. Your regulator will then light up to
show that it is working.
DISCONNECTING AND STORING YOUR
SOLAR PANEL
l Disconnect the Anderson plug off the battery
clips first and then proceed to take the battery clips off the
battery.
l Roll the extension lead up neatly into the
storage clips behind the Solar panel. NOTE: MAKE SURE NOT
TO TWIST OR KINK THE WIRING IN AN UNNATURAL
WAY.
l
NEVER STORE YOUR SOLAR PANEL WITH THE BATTERY
LEADS CONNECTED TO THE PANEL.
l
PLACE THE BATTERY LEADS SEPERATELY IN THE FRONT
POCKET OF THE CARRY BAG.
TIP:
For optimal performance through-out the day,
set the panel to approximately *0° from the ground. Anywhere
between *0° and *0° will gain the best power absorption across the
course of the day.
