Description
1.Description
of the machine
This is new equipment to make granules directly from the target
materials with some crystal water. The output granules can be used
for filling capsules, dissolved medicines, etc. The machine is
driven by VFD, with simple construction, stable working
performance, easy cleaning and convenient maintenance.
2. Function and fields of application
Widely applied in the pharmacy, foodstuff industry, chemical
industry, etc. Especially for some products which is practicable
for granulating by wet granulation.
3.Working principle:
The machine is used to make granule output products directly by the
dry powder raw materials. The machine is using compression roller
to compressing the raw powder materials into sheet first, and then
crushing the sheet into pieces, finally granulating into the
granule output products.
4. Properties&Specialty:
The machine is equipped with lifting components, downward feeding,
sheet pressing, granulating, hydraulic system, cooling components,
shell casing, controlling system, etc.
1). Lifting function powered by hydraulic, while feeding and sheet
pressing powered by VFD.
2). The hardness of pressed sheet determined by feeding speed,
pressure of oil cylinder and speed of pressing roller, they are
complementary effects, can be pre-set, set into best status.
3). The output size can be adjusting by changing mesh sieve.
4). Pressure of oil cylinder can be adjusted according to different
raw material products processing.
5). Cooling by tap-water or chilled water, which used for
compulsively cooling the over heat produced by the pressing
process.
6). Equipped with touch screen for the controlling part, with easy
operation, and low fault rate.
7). External pressing roller components are available to be
dismantled for cleaning. Feeding screws can be taken out after
dismantling the hopper.
