Description

Engine
Units:

    US
    Metric

Base Power (1st Gear) - Net     **7.0 kW
Engine Model     Cat® C*3 ACERT™ VHP
Bore     **0.0 mm
Stroke     **7.0 mm
Speed at Rated Power     2,**0 rpm
Base Power (1st Gear) - Net - Metric     **7.0 kW
Derating Altitude - Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent     ***4.0 m
Derating Altitude - Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent     ***1.0 m
Derating Altitude - Tier 4/Stage IV/Japan ***4 (Tier 4 Final)     ***0.0 m
Emissions (1)     U.S. EPA Tier 4 Final/EU Stage IV/Japan ***4 (Tier 4 Final)
Emissions (2)     Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent Emission Standards
Emissions (3)     Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent Emission Standards
Maximum Torque - ISO ***9 - Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent     ***1.0 N·m
Maximum Torque - ISO ***9 - Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent     ***1.0 N·m
Maximum Torque - ISO ***9 - Tier 4/Stage IV/Japan ***4 (Tier 4 Final)     ***1.0 N·m
Standard - Ambient Capability     *0.0 °C
Standard - Fan Speed - Maximum     1,**0 rpm
Standard - Fan Speed - Minimum     **0 rpm
Torque Rise - Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent     *8%
Torque Rise - Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent     *8%
Torque Rise - Tier 4/Stage IV/Japan ***4 (Tier 4 Final)     *0%
VHP Range - Net     ******6 kW (******7 hp)
VHP Range - Net - Metric     ******6 kW (******2 hp)
Optimized VHP Range - Net     ******6 kW (******7 hp)
Displacement     *2.5 l
Number of Cylinders     6
Power Train
Forward/Reverse Gears     8 Forward/6 Reverse
Transmission     Direct drive, power shift, countershaft
Brakes - Dynamic Brake Torque per Wheel     ****1.0 N·m
Brakes - Parking     Spring applied, hydraulically released
Brakes - Secondary     Oil-actuated, oil-disc
Brakes - Service     Oil-actuated, oil disc
Hydraulic System
Circuit Type     Electro-hydraulic load sensing, closed center
Pump Type     Variable piston
Maximum System Pressure     ****0.0 kPa
Standby Pressure     ***0.0 kPa
Note     *Pump output measured at 2,**0 rpm.
Pump Output*     **0.0 l/min
Operating Specifications
Articulation Angle - Left/Right     *0°
Forward - 1st     4.5 km/h
Forward - 2nd     6.1 km/h
Forward - 3rd     8.9 km/h
Forward - 4th     *2.3 km/h
Forward - 5th     *9.0 km/h
Forward - 6th     *5.8 km/h
Forward - 7th     *5.5 km/h
Forward - 8th     *1.7 km/h
Reverse - 1st     3.6 km/h
Reverse - 2nd     6.6 km/h
Reverse - 3rd     9.7 km/h
Reverse - 4th     *5.0 km/h
Reverse - 5th     *8.0 km/h
Reverse - 6th     *0.8 km/h
Steering Range - Left/Right     *7.5°
Top Speed - Forward     *1.7 km/h
Top Speed - Reverse     *0.8 km/h
Turning Radius - Outside Front Tires     9.3 m
Note     Calculated with no slip and *3.5R*5 L*3 tires.
Service Refill
Fuel Capacity     **6.0 l
Cooling System     *0.0 l
DEF Tank     *6.0 l
Hydraulic System - Tank     *0.0 l
Hydraulic System - Total     **6.0 l
Engine Oil     *6.0 l
Transmission - Differential - Final Drives     *8.5 l
Tandem Housing - Each     **9.0 l
Front Wheel Spindle Bearing Housing     0.9 l
Circle Drive Housing     *0.0 l
Frame
Circle - Blade Beam Thickness     *0.0 mm
Circle - Diameter     ***2.0 mm
Drawbar - Height     **3.0 mm
Drawbar - Width     *6.0 mm
Front Axle - Height to Center     **0.0 mm
Front Axle - Total Oscillation per Side     *5°
Front Axle - Wheel Lean     *8° Left/*7° Right
Front Frame Structure - Height     **0.0 mm
Front Frame Structure - Thickness     *4.0 mm
Front Frame Structure - Width     **6.0 mm
Tandems
Sidewall Thickness - Inner     *2.0 mm
Sidewall Thickness - Outer     *2.0 mm
Tandem Oscillation - Front Down     *5°
Tandem Oscillation - Front Up     *5°
Height     **8.0 mm
Width     **6.0 mm
Drive Chain Pitch     *3.5 mm
Wheel Axle Spacing     ***1.0 mm
Moldboard
Blade Width     5.5 m
Arc Radius     **3.0 mm
Throat Clearance     **6.0 mm
Blade Pull* - Base GVW     ****7.0 kg
Blade Pull* - Maximum GVW     ****5.0 kg
Cutting Edge Thickness     *5.0 mm
Cutting Edge Width     **4.0 mm
Down Force - Base GVW     ****6.0 kg
Down Force - Maximum GVW     ****5.0 kg
End Bit - Thickness     *9.0 mm
End Bit - Width     **2.0 mm
Height     **7.0 mm
Thickness     *5.0 mm
Width     5.5 m
Note     *Blade pull calculated at 0.9 traction coefficient, which is equal to ideal no-slip conditions, and Gross Machine Weight.
Blade Range
Maximum Blade Position Angle     *5°
Maximum Lift Above Ground     **0.0 mm
Maximum Depth of Cut     **0.0 mm
Blade Tip Range - Backward     5°
Blade Tip Range - Forward     *0°
Circle Centershift - Left     **0.0 mm
Circle Centershift - Right     **0.0 mm
Maximum Shoulder Reach Outside of Tires - Left     ***5.0 mm
Maximum Shoulder Reach Outside of Tires - Right     ***5.0 mm
Moldboard Sideshift - Left     **0.0 mm
Moldboard Sideshift - Right     **0.0 mm
Ripper
Ripping Depth - Maximum     **2.0 mm
Shank Holder Spacing - Minimum     **5.0 mm
Shank Holder Spacing - Maximum     **0.0 mm
Ripper Shank Holders     7
Penetration Force     ****9.0 kg
Pry-Out Force     ****2.0 kg
Machine Length Increase, Beam Raised     ***0.0 mm
Weights
Operating Weight - Typically Equipped     ****3.0 kg
Weights Tier 4 Final/Stage IV/Japan ***4 (Tier 4 Final)*
Gross Vehicle Weight - Base** - Front Axle     ***8.0 kg
Gross Vehicle Weight - Base** - Rear Axle     ****6.0 kg
Gross Vehicle Weight - Base** - Total     ****4.0 kg
Gross Vehicle Weight - Maximum Tested - Front Axle     ****0.0 kg
Gross Vehicle Weight - Maximum Tested - Rear Axle     ****0.0 kg
Gross Vehicle Weight - Maximum Tested - Total     ****0.0 kg
Gross Vehicle Weight - Typically Equipped - Front Axle     ***6.0 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle     ****7.0 kg
Gross Vehicle Weight - Typically Equipped - Total     ****3.0 kg
Note (1)     *No Tier 4 Final/Stage IV/Japan ***4 (Tier 4 Final) emission engine: subtract **0 kg (**1 lb) from rear axle wt. & total wt.
Note (2)     **Base operating weight calculated on standard machine configuration with *3.5R*5 tires, full fuel tank operator and rops cab.
Dimensions (Approximate)
Ground Clearance - Rear Axle     **3.0 mm
Height - Exhaust Stack     ***4.0 mm
Height - Front Axle Center     **0.0 mm
Height - Top of Cab     ***6.0 mm
Height - Top of Cylinders     ***5.0 mm
Length - Between Tandem Axles     ***1.0 mm
Length - Counterweight to Ripper     ****1.0 mm
Length - Front Axle to Mid Tandem     ***5.0 mm
Length - Front Axle to Moldboard     ***6.0 mm
Length - Front Tire to Rear of Machine - Including Tow Hitch     ****3.0 mm
Width - Outside Front Tires     ***1.0 mm
Width - Outside Rear Tires     ***1.0 mm
Width - Tire Center Lines     ***3.0 mm
Standards
Brakes     ISO ***0: ***1
ROPS/FOPS     ISO ***1: ***8/ISO ***9: ***5
Sound     ISO ***4: ***8/ISO ***5: ***8/ISO ***6: ***8
Steering     ISO ***0: ***7
Optional Tire Arrangements
Wheel Group - *9.5×*5 MP (1)     Tires: *3.5R*5 Bridgestone VKT 2 Star
Wheel Group - *9.5×*5 MP (2)     Tires: *3.5R*5 Bridgestone VKT 1 Star
Wheel Group - *9.5×*5 MP (3)     Tires: *3.5R*5 Bridgestone VJT 1 Star
Wheel Group - *9.5×*5 MP (4)     Tires: *3.5R*5 Michelin XHA 2 Star
Wheel Group - *9.5×*5 MP (5)     Tires: *3.5R*5 Michelin XLDD 2 Star L5
Variable Power Tier 4 Final/Stage IV/Japan ***4 (Tier 4 Final), Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent or Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent Emission Standards - Metric
Gear - Forward 1st     **7.0 kW
Gear - Forward 2nd     **7.0 kW
Gear - Forward 3rd     **2.0 kW
Gear - Forward 4th     **9.0 kW
Gear - Forward 5th     **4.0 kW
Gear - Forward 6th     **1.0 kW
Gear - Forward 7th     **5.0 kW
Gear - Forward 8th     **6.0 kW
Gear - Reverse 1st     **7.0 kW
Gear - Reverse 2nd     **7.0 kW
Gear - Reverse 3rd*6th     **2.0 kW
Variable Power Tier 4 Final/Stage IV/Japan ***4 (Tier 4 Final), Tier 3/Stage IIIA/Japan ***6 (Tier 3) Equivalent or Tier 2/Stage II/Japan ***1 (Tier 2) Equivalent Emission Standards - Net
Gear - Forward 1st     **7.0 kW
Gear - Forward 2nd     **7.0 kW
Gear - Forward 3rd     **2.0 kW
Gear - Forward 4th     **9.0 kW
Gear - Forward 5th     **4.0 kW
Gear - Forward 6th     **1.0 kW
Gear - Forward 7th     **5.0 kW
Gear - Forward 8th     **6.0 kW
Gear - Reverse 1st     **7.0 kW
Gear - Reverse 2nd     **7.0 kW
Gear - Reverse 3rd*6th     **2.0 kW