Description

Product Name:MedicalProtectiveEyeMask;Goggles;Protective Glasses;
Structure composition: the product is composed of protective cover, lens and fixing device (elastic band) made of high polymer material. Non sterile, disposableï¼›
Product performance:
1. Appearance and structure: the surface of the protective cover shall be smooth, burr free, sharp angle free, colorless and transparent, and the wearing shall not cause discomfort to the eyes and faces; the surface of the lens shall be flat, smooth, scratch free, ripple free, bubble, impurity or other obvious defects that may damage the vision; the adjustable parts or structural components shall be easy to adjust or replace, and the elastic band shall have good elasticity.
2. Specification: eye mask size: length **6.4mm, width *4mm, width *5mm, error no more than ± *0%; elastic band length no less than **0mm, width no more than *0mm, elastic band elongation no less than *0%.
3. Falling resistance: the eye mask falls freely on the hard surface from 1m high with three different starting positions, the structural parts shall not fall off, the appearance of the eye mask shall not be damaged, and the lens shall not have cracks.
4. Heat resistance: the eye mask shall not deform after being kept in water at *7 ℃± 2 ℃ for 3min.
Usage method:Open the package, take out the medical isolation eye mask; open the elastic belt to the size of the head, and put the product on it; adjust the protective cover and elastic belt to make it fully fit in the eye position.
Storage requirements: store in a dry, well ventilated and clean warehouse with relative humidity no more than *0% and no corrosive gas.
Scope of application: it is used in medical institutions to prevent splashing of liquid, blood or splashing.