Description
Heavy type gear mill. Designed for cutting gears with a diameter of
***0 to ****0 mm by generating method with hob and/or by the single
indexing method with disk-type milling cutter or formed end mills.
The following can be cut on these machines: 1) spur and helical
gears with external and internal gearing; 2) worm wheels by the
radial and tangential method of the worm or cutter-blade; 3)
chevron gears with a groove for the output of the worm milling
cutter; 4) chevron cogwheels without grooves for the entrance of a
modular milling cutter.
Customer of heavy type gear mill are manufacturers of vehicles,
machines, or machine components, that machine large gears in low
volume, along with other machining tasks.
Heavy machinetool production are highly labour-intensive and
therefore costly process. For design and construction of heavy
machine needs considerable time.
Our company proposes to consider an integrated approach in the
supply of machine tools and production technology. On the basis of
the Kolomna Machine-Tool Plant and our production site, our
specialists will perform a machine fault detection, repair or
modernisation. After carrying out such work, the customer will
receive a machine that meets its requirements. The use of various
numerical control systems as FANUC, SIEMENS, MITSUBISHI etc. adapts
the machine to the conditions of production of the customer. The
advantages of purchasing used machines are reduced delivery times,
lower cost. The disadvantage may be the lack of quality structure
of the machine, its wear. Therefore, for a complete supply, we
offer the services of the manufacturer KZTS Kolomna, as the
developer (designer) of these machines and hands and the experience
of our specialists who repair and upgrade this equipment with high
quality and just in time.
Gear hobbing machines 5A**2P / ***5 / KU***0*
Max. diameter of gears to be cut, mm ***0 / ***0 / ****0
Max. hob slide vertical travel, mm **0 / ***0 / ***0
Max. module, mm:
- with hob *0 / *0 / *0
- with dick-type cutter *5 / *0 / *0
- with end-milling cutter *0 / *0 / *0
Max. tooth helix angle of gears, deg +/- *5
Number of teeth cut ******0 / *****0 / ******0
Table diameter, mm ***0 / ***0 / ***0x***0*
Max. table load, kg ****0 / *****0 / ****0*
Main motor power, kW *0 / *2.5 / **0
Overal dimentions of the machine, mm:
- length ***0 / ****5 / ****0
- width ***0 / ***5 / ****0
- height ***0 / ***5 / ***0
Mass of the machine, kg ****0 / *****0 / *****0
* Model KU***0 have special design for produce of the sectors the
gear wheels diameter till ****0 mm
