Description

ADVANTAGE 


1. The brass separator and water collector of monomer forging and pressing make the distribution of chilled water in and out of coil more uniform and the flow resistance less, give full play to the whole efficiency of heat exchanger and greatly reduce the flow resistance of water system



2. The end plate and deflector plate of the volute are connected by toothed way, which overcomes the defects of air leakage and easy rust of the electric welding connection. 



3. The shell body of the unit is formed by stamping and bending of high strength galvanized steel plate with strong anticorrosion ability.The inner wall of the roof is pressed with a hot pressing PE insulation cotton to prevent the phenomenon of cold bridge.The bottom of the water tray is wrapped with PE insulation cotton, which is formed by primary hot pressing.



4. The optimized design of the drain port of the condensate tray can discharge the condensed water generated during the operation of the unit to the maximum extent and greatly reduce the breeding of bacteria and microorganisms.