Description

The hydraulic coupler of the scraper is the transmission part between the reducer and the motor of the coal mine scraper, which can transfer the torque.


If there is a problem with the hydraulic coupler of the scraper machine, it will make the scraper conveyor of coal mine unable to work normally. Its common problems mainly include the following points:

1. The temperature of one of the two hydraulic couplers of the scraper is too high

2. Oil leakage in hydraulic coupler of plate scraper

3. The temperature of hydraulic coupler of plate scraper has exceeded the specified value
Common fault analysis of hydraulic coupler for plate scraper

In view of the above scraper hydraulic coupler, through the reasonable way to solve the problem! When the temperature of one of the two hydraulic couplers of the squeezer is too high, it is because the oil amount of the two hydraulic couplers is not equal. It is enough to check and adjust the oil amount of the two hydraulic couplers to be the same. In case of oil leakage in the hydraulic coupler of the plate scraper, check whether the oil filling plug and fusible alloy protection plug are loose, tighten it if so, then check whether the sealing ring or gasket is worn out, and replace it. If the temperature of the hydraulic coupler of the scraper exceeds the specified value, the formula of the fusible alloy protection plug is wrong and needs to be reconfigured.

These problems of hydraulic coupler of plate scraper require us to be serious and responsible in daily maintenance work. In fact, the outbreak of many problems is a process of accumulation. Early detection and early solution can ensure the safe and stable production. Henan Shuangzhi machinery professional coal machine parts manufacturers, all kinds of coal machine parts welcome to consult cooperation!