FOB Price
Get Latest Price1 ~ 20 / Unit ( Negotiable )
|Minimum Order
Place of Origin:
-
Price for Minimum Order:
Minimum Order Quantity:
100 Unit
Packaging Detail:
paper box, carton
Delivery Time:
10-30 days
Supplying Ability:
10000 Unit per Month
Payment Type:
T/T
連絡先担当者 Donna
Zhuhai, Guangdong
| Features | |||||||||||||||
| â— Constant Current output | â— Typical lifetime ≥ 50000 hours | ||||||||||||||
| ◠Plastic case with terminal，Class II. | ◠100% full load bur-in test | ||||||||||||||
| â— Built-in EMI filter with tiny ripple,flicker-free | â— Protection: Short circuit/Over current/Over voltage/Over load | ||||||||||||||
| â— High performace and reliability | â— 3 years warranty | ||||||||||||||
|
|||||||||||||||
| Specifications | CE RoHS SELV | ||||||||||||||
| Model | Power | Input voltage | Out voltage | Output current | Effi | PF | Warranty | Material /IP | Size(mm) | Weight | |||||
| NC-7300-LC5 | 4-7W | 100-240Vac | 12-24Vdc | 300mA | 80% | ＞0.9 | 3 years | Plastic/ IP44 | 80*32*22mm | 43g | |||||
| NC-12300-LC5 | 8-12W | 100-240Vac | 24-42Vdc | 300mA | 85% | ＞0.9 | 3 years | Plastic/ IP44 | 88*39*23mm | 59g | |||||
| NC-12300-LC5 | 12-18W | 100-240Vac | 42-62Vdc | 300mA | 85% | ＞0.9 | 3 years | Plastic/ IP44 | 115*45*27mm | 100 | |||||
| NC-18480-LC5 | 24-42Vdc | 480mA | |||||||||||||
| NC-24300-LC5 | 18-24W | 100-240Vac | 62-80Vdc | 300mA | 85% | ＞0.9 | 3 years | Plastic/ IP44 | 115*45*27mm | 100 | |||||
| NC-24600-LC5 | 24-42Vdc | 600mA | |||||||||||||
| NC-36980-LC5 | 24-36W | 90-260Vac | 24-42Vdc | 980mA | 88% | ＞0.9 | 3 years | Plastic/ IP44 | 115*45*27mm | 120g | |||||
| NC-481200-LC5 | 40-48W | 90-260Vac | 24-42Vdc | 1200mA | 88% | ＞0.9 | 3 years | Plastic/ IP44 | 140*45*29mm | 150g | |||||
| 　 | |||||||||||||||
| Characteristics | Frequency | 50/60Hz | 　 | 　 | 　 | 　 | 　 | 　 | |||||||
| Current tolerance | ±5% | 　 | 　 | 　 | 　 | 　 | 　 | ||||||||
| Max Load | 80% | 　 | 　 | 　 | 　 | 　 | 　 | ||||||||
| Leakage current((mA ) | < 0.5mA / 230VAC | 　 | 　 | 　 | 　 | 　 | |||||||||
| Ripple&noise | < 650mVP-P | 　 | 　 | 　 | 　 | 　 | 　 | ||||||||
| hold-up/start-up time time | 100ms, 30ms,20ms/ 230VAC | 　 | 　 | 　 | 　 | ||||||||||
| Leakage current((mA ) | < 0.5mA / 230VAC | 　 | 　 | 　 | 　 | 　 | |||||||||
| Protection | Over current | above 108%-116%,power limiting, recovers automatically after fault removed | 　 | ||||||||||||
| Over voltage | switch off, recovers automatically after fault removed | 　 | 　 | 　 | |||||||||||
| Short circuit | hiccup mode,recovers automatically after fault removed | 　 | 　 | 　 | |||||||||||
| Environment | Operating Temperature | -25℃~~+45℃ | 　 | 　 | 　 | 　 | 　 | ||||||||
| Storage Temperature | -30℃~~+80℃ | 　 | 　 | 　 | 　 | 　 | |||||||||
| Humidity | 20~~95% | 　 | 　 | 　 | 　 | 　 | 　 | ||||||||
| Security | LVD | 2014/35/EU,EN61347-1:2015，EN61347-2-13:2014 | 　 | 　 | 　 | ||||||||||
| EMC | 2014/30/EU,EN55015:2013+A1:2015, EN61547:2009,EN61000-3-2,EN61000-3-3:2013 | 　 | |||||||||||||
| Voltage Insulation/Resistance | I/P-O/P:3.75KVAC,I/P-O/P:>100M Ohms/500VDC/28℃/65% RH | 　 | 　 | ||||||||||||
| Classification of Installation and Use | Class II | 　 | 　 | 　 | 　 | 　 | 　 | ||||||||
| Note | ◊ All parameters NOT specially mentioned are measured at 240VAC input, max rated load and 25℃ of ambient temperature | ||||||||||||||
| ◊ Ripple & Noise are measured at 20MHz of bandwidth by using a 300mm twisted pair-wire terminated with a 0.1uF & 47 uF parallel capacitor. | |||||||||||||||
| ◊ The driver is considered as a component to be operated in combination with equipment,since performance will be affected by the complete installation. | |||||||||||||||
| ◊ Good heat dissipation will prolong the working life of the driver.Please ensure good ventilation. | |||||||||||||||
| ◊ Please check if the output voltage/current of any LED lights used comply with the working voltage/current of the product. | |||||||||||||||
| ◊ Be ware of high power pressure may caused by short circut when installing metal casing products. | |||||||||||||||
| ◊ Please ensure all wires connections and polarities are correct before appling power to avoid any damages to LED Lights. | |||||||||||||||
| ◊ The product shall be installed and serviced by a qualified person. | |||||||||||||||
| ◊ Please contact supplier if a fault occurs. | |||||||||||||||
