Single arm Stereotaxic instrument

Description

The Lab Standard Stereotaxic Instrument, is ideal for researchers in need of a versatile, reliable instrument for stereotaxic procedures with small animals. Precision alignment when using the Lab Standard ensures accurate placement of electrodes, micropipettes, and other devices.
the time-proven U-Frame design concept, sturdy construction, and adaptability to most model species make this the best choice for a stereotaxic instrument.
Special design
We have special design for the rotate base ,when you want to put it to any angle,no need any support,it can be standing and will not fall off to the bottom base.this can protect your instrument very well.
Easily Read Scales
All scales are oriented to be read easily from the open end of the U. This is the position from which most scientists prefer to work.The numerals on the scales are larger, and therefore more easily read. The scale lines arelaser engraved, to allow finest possible permanent marking of scales on all 3 axes. Precise alignment with facing vernier scales gives accurate resolution to 0.1mm.
Smooth Movements
The Lab Standardsexclusive, triple lead screwsallow the fastest positioning possible, consistent with lining up the scales easily at a given coordinate.
Versatility of Positioning
The manipulator arm controls medio-lateral and vertical positioning via lead screws, and antero-posterior movement via dovetail slide movement, with*0 mm of travel possible in each direction. A Universal Joint allows the investigator tochange the angle of the probe up to *0oin either the antero-posterior or medio-lateral planes. The improved locking mechanism on the Lab Standard will hold any angle position without slippage. And of course, it also provides anabsolute lock at *0o vertical.
In addition, a swing joint allows the investigator to conveniently swing the manipulator arm and probe out of the way for performing a procedure then reliably return the probe to the same point.
Convenient for Electrophysiology
Integralbrass bushings in the manipulator armallow grounding directly to the closest metal on the manipulator arm even the probe holder.
Selection of Accessories
Species adaptors are available to fit rat, cat/monkey, dog/monkey, mouse, guinea pig and small bird. Probe holders and species adaptors for U frame stereotaxic instruments from other manufacturers are generally compatible with the Lab Standard frame.
Classic and Proven U-Frame Design for small animals
Features
Large, easy to read vernier scales Scales are laser engraved accurate to **0 microns
Triple lead screws for fast positioning *0 mm of vertical, lateral and anterior-posterior travel
Absolute lock at *0 degrees (vertical)
Versatile Positioning
The manipulator arm controls medial-lateral and ventral-dorsal using exclusive triple lead screws for faster positioning, and anterior-posterior movement via dovetail slide movement, with*0mm of travel possible in each direction. A universal joint allows the researcher to change the angle of the probe up to *0 in either the anterior-posterior or mediallateral planes. The improved locking mechanism on the Lab Standard will hold any angle position without slipping. And of course, it also provides an absolute lock at *0 vertical.
Specila material finish
We use special material finish for the U-frame.If you put some chemical solution on it with carefully,just remove it ,the colour will not be change.Normal finsih is spraying in the market,when you put some chemical solution on it ,the colour will changed as time goes on.looks more old and old