Waterproof heating mat-503

Description

Blosam uncoupling membrane is specifically designed to allow the installation of ceramic and stone tile over any even and load-bearing substrate and an underlayment for ceramic and stone tile.
This plastic membrane system geometrically configured to provide air space between the tile and the substrate to allow independent movement between the two and limit the transfer of the stresses." BLOSAM UM**3 is a polyethylene membrane with a grid structure of square cavities, each cut back in a dovetail configuration, and an anchoring fleece laminated to the underside. The anchoring fleece is embedded in thin-set mortar to provide a mechanical bond to the substrate. Tile is installed over UM**3 using the thin-bed method in such a way that the mortar becomes mechanically anchored in the square, cutback cavities of the matting. Designed specifically for ceramic tile and dimension stone installations, UM**3 serves as an uncoupling layer, waterproofing membrane, and vapor management layer that accommodates moisture from beneath the tile covering. Further, UM**3 performs all these functions while still providing adequate support/load distribution for the tile covering. The combination of these four essential functions allows for the successful installation of tile over a wide range of substrates, including plywood/ OSB, concrete, gypsum, heated floors, etc..
The integration of this uncoupling, waterproofing, load-distribution, and vapor management functions makes consistent results viable.