Paper Film slitter and rewinder machine

Description

 
APPLICATION
A. 12-180um HOT STAMPING FOIL,COLDING FOIL,HOLOGRAPHIC FOILS,METALIZED FOIL and so on
B. 12-180um PRIMARY FILM  (BOPP,PVC,LDPE,PET,SINGLE SILICON FILM and so on)
C. 12-180um LAMINATES   (FILM to FILM,FILM TO FOIL,FILM TO PAPER and so on)
D. Non-Woven FABRIC
E. 40-80gram PAPER/LABEL/ADHESIVE LABEL
F. 20-40UM ALUMINUM FOIL
AND OTHER MATERIAL (PlS CHECK WITH THE SALES MANAGER)

BASIC SPECIFICATION
1            SLITTING WIDTH               300mm-1600MM
2            SLITTING THICKNESS        12-250UM
3            UNWIND DIA.                    MAX1000MM
4            UNWIND CORE I.D.           SHAFTLESS 3 INCH AND 6 INCH
5            REWINDING DIA.               MAX 600MM
6            REWINDING WIDTH          MINI 30MM
7            REWINDING CORE I.D       3 INCH SLIPPING AIR SHAFT
8            SLITTING UNIT                  RAZOR BLADE  EACH 10 PCS
                                                        SHEAR CIRCLE BLADE 10 PCS
9            MECHANICAL SPEED        MAX550M/MIN
10          WORKING SPEED              MAX500M/MIN
11          MACHINE FRAME THICKNESS:  50MM
12          METER COUNTER:              METER COUNTER
13          WASTE EDGE UNIT:            AIR BLOWER
14          POWER SOURCE                380V,3 PHASE 4 WIRES,50Hz
15          PNEUMATIC  SOURCE        0.8MPA
16          LASER POSITIONING          10 PCS
17          MACHINE SIZE (REF. ONLY):
 2950mm(not including unloading frame tree)×2550mm×1970mm
                              4190mm(including the unloading frame tree)×2550mm×1970mm
18          FLOOR SPACE(REF.ONLY)： 4200MM*3300MM
19          N.W/G.W (REF. ONLY):         3000/3500

FUNCTIONAL DESCRIPITION

Rewinding:
1 3 INCH SLIPPING FRICTION AIR SHAFT to ensure the rewinding tension stable;
2 Full width pressing rollers by air control to ensure the finished roll surface keep smooth;
3 Anti Stati Remove Brush for both up and down rewinding press roller
4 Small indiviual press roller specially designed for the individual roll which not average thickness
5 Manual laser core position units help to set paper/plastic cores easily and quickly, begin next slit run with very short downtime.
6 Automatic tension control to ensure the rewinding tension stable.

Blade Unit:
1 Shavor or Razor blade setting easily setting by wrench losing and fixing, very quick and easy;
2 Shear Circle Blade slit for all kind of material stable slitting at high speed.
 
Unloading:
1 AUTO VERTICAL ROLL UNLOADING DEVICE not only can move horizontally and parallelly,make finished roll unloading much easier than before;
2 Auto unloading function to avoid manual hand push, save time and energy of operator.

Unwinding:
1 Magnetic Brake with load cell close loop system for unwind tension control
2 3 inch and 6 inch shaftless uwinding system, easily change the jumbo roll;
3 Hydraulic lifting system to help the operator loading the jumbo roll max. 1 ton from floor;
4 Material splice table, easy change and guarantee edge consistency
5 EPC ultrasonic edge guider to avoid the influnce from shinning materia which reflect light back;
6 Back Control Button & Screen Display make the operator easily control the slitter at back side
3 SECURITY GRAVITY CARPET to ensure the safty of the operator


GUARANTEE AND SERVICE
1 100% Test and Check Before Shipment.
2 Detailed Instruction Manual.
3 One Year Guarantee for All Key Parts.
4 Installing and Operator Training Service Provided.
5 Whole-Life Free Technical Support.
6 Regular On-Site Routine Inspection.