Description

Steel edge rubber waterstop joint with U-shaped steel edge clamps, also known as U-shaped steel edge clamps, U-shaped clips, U-shaped steel edge hoop pieces, etc., is a construction site for steel edge waterstop lap to be used when the engineering materials. In addition to the U-shaped clips generally need butyl rubber tape and rivets and other materials. Steel edge rubber waterstop joint with U-shaped clips is processed from galvanized steel tape, with small holes punched on it to facilitate riveting on site. Steel edge waterstop cold joint method and steps.

1, the need to butt the steel edge waterstop joint wipe with a cloth, and keep it clean, dry, and then align the end parts.

2, in the steel edge of the two steel edge of the waterstop each put a steel edge of the waterstop U-clip, according to the U-clip hole distance with an electric drill hole, and then riveted with a rivet gun rivets.

3、Wipe the surface of the steel edge waterstop with a cloth to keep it clean.

4, in the riveted U-type hoop outside, along the steel edge of the waterstop lateral winding a circle of butyl tape, butyl tape

width of about **0mm, squeeze by hand until the sticky.