Description
Impeder Cores Ferrite Rods for Tube Welding of High Frequency
Induction increasing the efficiency of welding process
Ferrite Impeder Rods for tube welding:
High Frequency Induction welding is the common process for steel
tube manufacturing. Ferrite rod core plays a very crucial part in
increasing the efficiency of welding process. Major requirement of
ferrite cores are low power loss and close control of
dimensions.
Impeder rods are manufactured using soft ferrites by extrusion and
sintering process. impeder rods are manufactured under
controlled processes to achieve the tight dimensional control and
highest magnetic properties, which would ensure the best
performance of steel tube welding.
We offer complete range of products in all kinds of sizes and
shapes. such as 3
×**0mm.6
×**0mm.6
×2
×**0mm .8
×**0mm. *0
×3
×**0mm , *0
×5
×**0mm ,**2
×**0mm.....
Ferrite high Grades:
we manufacture impeder rod cores for induction welding with
low power loss material grades, provide better magnetic such
as lower power loss, higher saturation flux density (Bs) as well as
better Bs stability at higher temperatures.
product
type:
CRS solid
fluted type :
Features:
It is characterized by
a radial groove type, which can effectively cool the entire
magnetic core.
CRSH
hollow type：
Features: It is a
radial groove type with a central hole, and cooling water can be
injected into the inner diameter part, which can effectively cool
the entire magnetic core.
In addition, the holder
rod can be inserted into the inner diameter.
CRF solid flat
sided type：
Features: It has an
elliptical cross-section, and one can be used for small-diameter
pipes or several combinations can be used for large-diameter
pipes.
solid
flutedImpeder Cores Ferrite Rods for Tube Welding of High
Frequency Induction increasing the efficiency of welding process
