carbon steel pipe API5L with PTFE liner for acid medium

Nominal diameter: DN*5~DN**0,1″~*2″

Length: ≤***0mm (size≤DN**0) ≤***0mm (size>DN**0)

Temperature range: **9°C~**0°C

Applicable medium:

Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals.

Specification Instruction:

Kaxite manufactures PTFE lined pipe and fittings by compression molding, isostatic molding, injection molding, transfer molding,

hot rotomolding, ram/paste extrusion, 3D rotational molding etc. Characters as below:

• Working temperature is high at the range of **9°C***0°C; except the molten alkali metals, element fluorine and aromatic

hydrocarbon, lined products can be used in any chemical medium.

• Vacuum resistance. In the range of **9°C***0°C, it is applicable for vacuum condition. In chemical production, the vacuum

condition occurs due to cooling, longitudinal emissions, or medium backflow.

• High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0 MPa.

• Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining

processing, make it excellent antiosmosis.

• PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components

and fluorine plastic.

• Kaxite us adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide

convenience for installation.

Data sheet

Specific Gravity: 2.***2.*9g/cm3 as per ASTM D **2 test standard.

Tensile Rate: *0.7Mpa minimum as per ASTM D **8 test standard.

Elongation Rate: **0% minimum as per ASTM D **8 test standard.

Manufacture Standard: ASTM D ***5. Operating in vacuum condition within **0°C