タイトルまたは説明

Description

SY- ***6 isour well developed organ silicon emulsion type defoamer which can be used for a wide variety of foam control application. It can effectively eliminate and inhibit the stubborn bubble due to the different surfactantsunder the condition of high temperature and high alkali. It has many advantages, such as: very stable emulsion, low consumption, not easy to adhere to the machines and mesh, enhancing the work efficiency of the machines, sizing percentage, and pulp washes level. It is very useful to save the production and raw materials cost for the pulping mills.

How to use
SY****6 can be used directly or after proper dilution with water. The diluted emulsion should be stirred gently before use. The general dosage is3*0g-8*0g per ton. The actual amount depends on different foaming problem and should be determined according to the tests result.
 
Storage & Handling
SY****6 should be sealed and stock under room temperature and away from light. Exposure to extremely hot or cold environment should be avoided.
SY****6 is available in **0kgs, ***0kgs, or negotiated packages.
The shelf life is 1 year.
Product safety
In case of freezing during transportation and storage, theantifoamshould be unfreeze naturally and stirred evenly before use.
Avoid contact with eyes and respiratory system. Once happen, please wash with lots of water. Visiting a doctor is necessary if the situation is serious.
 
For more information please refer to Material Safety Data Sheet.
 
 
NOTE
 
The information provided to the customers in this data sheet is intended as a guideline and is provided in good faith. Changes may occur from system to system as methods of use and conditions are beyond our control, hence users are requested to evaluate the recommendations before actual application to get desired performance.