タイトルまたは説明

Product description:
                                                    

1. Fabrication of component < *0mm SOP columnar diodes, triodes, SOTs, SOPs, IC chips and ***3 components except of 5m Aluminum electrolysis electric capacitor.
2. Equipped with Intelligent electrical feeder.
3. Program and mounting technology for multi–panels.
4. Integrated offline program function.
5. Program control
6. Visual programming
7. Powerful data import function, any formats of PCB file can be imported. A new program can be finished in *0 minutes.
8. Stably pick and place process of SMD ***2.
9. Security cover to protect the operator for dust proof.
*0. High-precision linear guide rail
*1. Configuration of 5 kinds of nozzles. The software reminds you in case of a "nozzle changing". 

Introduction

The automatic pick and place machine TP **0+ is a mini-type high speed and cost effective pick and place machine.
The TP**0+ can mount components ***3 and bigger as well as SOPs, SOICs < *5x*5mm, PIN foot < *4.
In addition, the TP**0+ equips *2pcs of 8 feeders (electric feeder 8mm, *2mm, *6mm,*4mm can be chosen),
The Z-axis can route freely.

Main Parts:

1. Step motor with an angle change function: TP**0+ can mount *5°, *0°,**0° angle component.
2. Dual Parallel square-type wide guide rail: Compared with a balling guide rail, the guide rail has a small space to ensure the precision accuracy.
3. Visual + machinery position system: The camera is placed near the mounting head, which has a magnifying  ' + ' cursor for a more accurate reference point.
4. No-contact flying centering system: Flying centering system can mount most of SMD components including: ***3, ***5, ***6 etc and SOPs, SOICs with a size under *5x*5mm and PIN foot less than *4.
5. Flexible reference point system (RPS): Next to the standard round reference point, a square formed and ring formed PCB pad with hole can be identified as a reference point as well.
6. All-purpose automatic feeder: Choose one of the 8mm, *2mm,*6mm or *4mm feeder according to your component type and your required speed.
7. Protel file of component data import: The Software control with limitless data file and saving function, that you can call them at any time if its needed.

Technical Parameter:

Max PCB size: **0x**0m
Max moving range: **0x**0mm
Max moving range of Z-axis: *0mm
Typical speed: 2.**0 - 3.**0cph
Max. accuracy: +/- 0.**4mm
Repeat accuracy: +/- 0.*5mm
Positioning: Visual + machinery positioning
Component available: ***3, ***5, ***6, etc., SOPs, SOICs < *5x*5mm, PIN foot < *4.
Programming method: Software program
Driving mode: Industrial synchronous belt
Automatic feeder: 8mm, *2mm, *6mm, *4mm can be chosen.
Number of feeder: Max *0pcs of 8mm GFTA**8S feeder
Number of IC Plate: > 2
Operating system: Windows XP
Air pressure: *0psi (0.5Mpa)
Power supply: **0V. *0Hz
Weight: *5kg
Dimension: **0x***0x**0mm