Co2 laser tube

离岸价格

Get Latest Price

350 ~ 355 USD / Piece

1 Piece Minimum Order

国:

China

モデル番号:

A4s

离岸价格:

350 ~ 355 USD / Piece （交渉可能） Get Latest Price

ロケーション:

China

最低注文量の価格:

350 per Piece

最低注文量:

1 Piece

パッケージの詳細:

carton

納期:

within 10 days after received your deposit

供給能力:

100000 Piece per Month

支払いタイプ:

L/C, T/T

製品グループ :

co2 laser tube

今すぐお問い合わせください

パンフレットを見る

PCS EQUIP Co., Ltd.

China

無料会員

連絡先担当者 Mr. Allen

No. E2-116, Guizhou Road, Changchun China, 130032, Changchun, Jilin

今すぐお問い合わせください

製品仕様

Power :100W
Length:1450mm
Diameter:80mm
Working time:11 000 hrs
Warranty:12 months

タイトルまたは説明

As series Co2 laser tube modify the beam size and quality effectively that solves the beam distortion, increase the effective power. Inner lens upgraded. All of inner lens and mirrors is customized by the U.S.II-VI Infrared. Adopting new catalytic technology to enhance coating firmness and catalytic consumption,
stable on longtime working, lifespan is longer. A6s, A8s are capable for thin metal and non-metal cutting, with better cutting performance.

Model	Length	Diameter	Rated Power	Max. Power	Current	Working Voltage	Ignited Voltage	Water Flow	Power Supply
A1s	***0	Φ*0±2	*0	*0	*2	*5Kv	*0kV	5 L/min	YL*2
A2s	***0	Φ*0±2	*0	**0	*6	*8Kv	*5Kv	7 L/min	YL-U1
A4s	***0	Φ*0±2	**0	**0	*8	*9Kv	*8kV	8 L/min	YL-U1
A6s	***0	Φ*0±2	**0	**0	*0	*1Kv	*0Kv	*0 L/min	YL-U2
A8s	***0	Φ*0±2	**0	**0	*5	*2Kv	*4Kv	*2.8 L/min	YL-U2

1. Power Supply requirements
Input required AC **0 ~ **0AV / *0Hz
2.Water cooling requirements
Chiller requires the distilled water or the deionized water Low PH level, pure, no scale, no pollution, no viscous.
Water Temperatureï¼š*0ï½ž*0â„ƒï¼›Liftï¼š*0M**5M;
Flow: 3L/min**2.8L/minã€‚
3. Environmental requirements
Laser should work at room temperature for ****0â„ƒand humidity for ****0%.
The laser is equipped with a power supply that operates under a well ventail environment.
The work space needs to meet local safety standards for the operation of laser equipment.
4 Installation
(1) Please install laser tube according to the marking on the laser tube, the best support position at the quarter of laser tube, as possible as keep the side up or side up indicator label, connect the wires of positive and negative terminal, inlet pipe and outlet pipe of the laser correctly.
(2) Turn on the chiller, adjust the laser tube direction, and ensure that the coolant is full of lasers and without bubble.
(3) Remove the window label and turn on the laser power supply to adjust the optical path.
Sometimes, to twist the laser tube angle so in order to adjust the laser beam is available.
Laser Power Supply

Model	*YL2**	YL-U1	YL-U2
Maximum current	*5mA	*8mA	*5mA
Output voltage	*0	*5	*5Kv
Warranty	*2 months	*2 months	*2 months
Color	Black	Black	Black
Power	*0W	0/*0W	0/0 W
Number of Coils	2	2	3

Feature:
1.        Easy Control: The start and stop of laser can be easily controlled by TTL level. And there are protection switch to test the external water, ventilation, et
2.        Easy control of laser power: Both **5V analog signal and PWM signal can control the laser power.
3.        The power supply has the function of open circuit protection: Under the condition of good protective in earth, the power supply can work in open-circuit condition for a short time, which could avoid the damage of laser power supply because of the bursting of laser tube, thereby enhancing the life of power supply.
4.        The power supply can take feedback interface which can be used in closed-loop control and testing the working current of laser.
5.        Aging testing **0 times starting and stopping in *0â„ƒand *2 hours circumstance.
6.        Application: CO2 laser power supply are mainly applied in engraving & cutting machine, laser marking machines and medical laser machine.
Installation

Connection of laser tube, the high voltage (HV+) of the laser power supply shall be connected to the anode (full reflection terminal) of CO2 laser tube.

The current circuit of the laser power supply is connected to the cathode (laser output terminal) of CO2 laser tube through an ammeter (or directly).
2. Connection of control signalï¼šControl signal shall be reliably connected to control terminal of the power supply.
3. Input of control signal: After connecting the output signal and TTL signal of external computer with the power supply, the laser tube shall work as expected.
Cautions:ã€€
1. Ensure that laser power should be place is well ventilated, it is strictly prohibited that the louver of laser power close to machine (the distance would better more than 3 cm).
2. HV output terminal shall not adopt open circuit! (HV output terminals shall be properly connected to the anode and cathode of the laser tube), High voltage connector and wire connection joint should not to be stressed and pulled etc.
3. Discharge resistance has been equipped inside the power supply and the residual voltage will be fully discharged 2s later after power off. Attentions should be given to avoid any electric shock! (Both output terminals of the high voltage shall ensure the isolation safety of the overhead *0KV.)
4. Three-poles socket with earth contacts shall be used to laser power supply. The enclosure should be well grounded to avoid electric shock.
5. Pay attention to the maintenance of the laser power, please cleaning the dust of power supply and cooling fan regularly                                                &

国:	China
モデル番号:	A4s
离岸价格:	350 ~ 355 / Piece （交渉可能） Get Latest Price
ロケーション:	China
最低注文量の価格:	350 per Piece
最低注文量:	1 Piece
パッケージの詳細:	carton
納期:	within 10 days after received your deposit
供給能力:	100000 Piece per Month
支払いタイプ:	L/C, T/T
製品グループ :	co2 laser tube