decanter centrifuge

タイトルまたは説明

The solid drum is internally installed with a concentric discharge screw As they rotate in the same rotation at a high speed, They have a certain rotational speed difference, which is caused by the driving system and the differential case Suspension enters the internal of the charge screw through the speed pipe and then goes into the drum after being accelerated Under the centrifugal force, solid particles of big density settle on the in-wall of the drum, and form a circular layer of cake, which is continuously pushed by the discharge screw to the small end of the drum then out of it, while the settled liquid is continuously discharge out of the drum from the vortex finder of the big end of the drum, hence solid-liquid separation of suspension.

Technical characteristics
1. High rotational speed, high separation factor and big length-to-diameter ratio. For centrifuges with drum diameter below **0mm, their separation rotational speed is usually above ***0r/min, their separation factor is above ***0 and their length-to-diameter ratio can reach up to 5. Among them, the highest rotational speed can reach ***0r/min, its separation factor is above ***0.
 
Big single machine processing capacity: The decanter centrifuge series with diameter of **0, **0, **5, **0, **0, **0, **0, **0, **0, **0 and **0(mm) are all designed according to the newest fluid theory and with reference to the advanced structure abroad, they have a big capacity and fine separating effect.