タイトルまたは説明

E***9 Single-component Polyurethane Waterproof Coating
 
 E***9 can be applied on wet surface and complicated projects with its unique mechanism of reaction by atmospheric moisture and the NCO end group of the PUP to form a seamless, strong bonding, elastic and flexible waterproof film.
 
 
 Product features 
One-component packaging, ready to use, avoid unstable condition when mixing
Anti-aging, acid & alkali resistance, high & low temperature resistance performance
Environment friendly: conform to the harmful substances standard GB *********1
Apply combine withhigh polymer membrane, self-adhesive polymer modified-bitumen waterproof membrane.
High bonding strength, high adhesion, excellent performance
 
 
 Applicable scope
 
Non-exposed roof, underground waterproofing, kitchen & bath and non-drinking water project
 
 
 Application procedures
 
Preparation →Substrate treatment→ Detail parts treatment→ Apply the bottom layer as treatment→ Scrape the coating layer→ acceptance→ Cover the protective layer
 
  main points of application
 
♦The surface should be clean and firm, repair flaw part beforehand.
♦Detail parts treatment: Coat a layer on the internal and external corners and the part of pipeline bottom, and then apply reinforce layer (non-alkali fiberglass fabric or non-woven fabric), make sure that the coating saturate completely the reinforce layer.
♦Application of basement layer: you may add some basic primer to strength the closure and permeability.
♦Multi-layer application: apply the coating on the substrate evenly, and then apply with vertical direction for next coating. The surface drying time is about *2 hours, the waiting time base on the first layer which touch to be non-stick, generally apply 2~3 times (or according to the design requirements).
♦The thickness of the coating should be 0.5~0.8mm.
♦Recommended application for substrate:  primer: principal material = 1:2 (weight), apply after mixing.