1.   Input voltage: *-phase: ******0V ±*0% (continuous fluctuation), **5%**0% (momentary/short fluctuation); *-phase: **8 - **0V ±*0% (continuous fluctuation), **5%**0% (momentary/short fluctuation): *-phase: ******0V±*0% (continuous fluctuation), **5%**0% (momentary/short fluctuation)

2.   Input frequency: *0Hz/*0Hz ±5%

3.   Output voltage: 0~rated voltage, bias <±3%

4.   Output frequency: 0.*****0.*0Hz

5.   Overload capability: **0% for *0s, **0% for *0s, **0% for 2s, once per *0 minutes

6.   Control method/technique: V/f, SVC(two modes/options: without PG1, or without PG2)

7.   Speed regulation range/Range of speed regulation: 1:**0 (V/f control, or vector control without PG1), 1:**0 (vector control without PG2)

8.   Speed accuracy: ±0.5% (V/f), ±0.2%(SVC)

9.   Speed fluctuation range: ±0.3%

*0. Torque response time: <*0ms

*1. Starting torque: 0.5Hz: **0% (V/f control, or without PG 1). 0.*5: **0% (without PG2)

*2. Starting frequency: 0.*****0.*0Hz

*3. Ramp-up time/Acceleration time, Ramp-down time/Deceleration time: 0.*******0s

*4. Carrier frequency/switching frequency: 0.7kHz**6kHz

*5. Frequency command source/setting source: Digital+ Keypad∧/∨; Digital +Terminal UP/DOWN; Communication; Analog (AI1/AI2/EAI)

*6. Motor started method: Started from starting frequency; DC brake then started; Speed searching/follow-up started

*7. Motor stop method: Ramp to stop; Coast to stop; Ramp stop + DC brake

*8. Dynamic brake capability: Brake action voltage: **0V***0V, service time: 0.0~**0.0s

*9. DC brake capability: DC brake starting frequency: 0.*0~**0.*0Hz, DC brake current: 0.****0.0%, DC brake time: 0.0~*0.0s

*0. Input terminals: DI *6 (can be extended to 7, including one high-speed pulse , NPN, and PNP supported), AI – 2

*1. Output terminals: HDO*1(high-speed pulse output), DO*1, RO*1(can be extended to 2), AO*1(can be extended to 2)

*2. Communication: Profibus-DP, CANopen, CAN, Modbus

*3. Efficiency: 7.5kW and below: ≥*3%, *1~*5kW: ≥*5%, *5kW and above: ≥*8%

*4. Characteristic: parameter copy, parameter backup, common DC bus, switchable between two motors’ parameters, flexible function code displayed/hidden, various main/auxiliary setting and switchover, speed searching/follow-up started, linear and three kinds of S-curve Ramp up or Ramp down programmable, Analog automatic correction, brake control, **-step speed control programmable, swing frequency control, fixed length control, tally function, three faults recorded, over-excitation brake, over-voltage stall prevention, under-voltage stall prevention, restart when power on programmable, hopping frequency, frequency bound, four sections of Ramp-up and Ramp-down time programmable, motor thermal protection, flexible fans start/stop, process PID control, simple PLC, flexible multi-functional key set, droop control, parameter identification, weak magnetic control, high-precision torque restrained, V/f separated control.