Gypsum board making line

タイトルまたは説明

Gypsum board production line is the equipment producing gypsum boards that are new building materials. The process is: gypsum slurry is made from plaster/ water and other additives, in a continuous mixer. This slurry spreads on the shielding paper in a uniform stream, combination with down paper at the shaping station. The slurry is complete sealed with the up-down paper through extrusion shaping machine and form regular board. Once formed, the board travels with steady speed on a series of setting belts. During this journey, the plaster core has time to set or harden. At the shear, the long train of board is cut into panels of specific length. These cut boards are then turned over and passed into a multi-level dryer. During the drying period, the excess water, which was required to form the initial slurry is gently evaporated off. After the boards have dried they are trimmed and stacked to form pallets. These pallets are then placed in the warehouse. The production line includes three main parts: raw material warehouse, heat power system and joint settings.

• Gypsum blocks can be used by unloaded wall and spacing wall
• The advantages are light, heat insulation, sound, fire resistance, smooth surface and dustless
• Gypsum blocks forming machinery consists of batch system, blending machine, forming machine, central hydraulic section, holding unit, machinery clamp and PLC controller
• It adopts international advanced technology of hydraulic top rising of vertical mold forming and PLC controller
• The gypsum blocks forming is being realized by full-automation, high-quality and accuracy
• Sanjin company makes forming machinery for gypsum blocks of both hollow and solid
• It may also design and make some specifications of machinery according to the user's demands
• Size: