タイトルまたは説明
Ceiling Concealed Duct
FCU
(1) Duct type, 2pipe
& 4pipe models are available
(2) Air
flow: **0 - ***0m³/h; Cooling capacity: 2.****6.*6kW; ESP:
*2Pa/*0Pa/*0Pa/*0Pa
(3) *0cm
extended drain tray, stainless steel drain tray, electric heater
are optional
(4)
Accessories including thermostat and motorized valve are available
for option
(5) High
static pressure ducted series is optional, airflow up to ***0m³/h,
ESP up to **0Pa
Features
1. 2pipe
2 rows & 2pipe 3rows & 2 pipe 4rows &
4pipe 3*1rows models are
available
2.
The water coil adopts OD9.*2mm seamless copper tube and blue fin
expanded together, coil is tested
in factory performance test lab under 2.8MPa to guarantee the
performance;
3. Adopt
single phase three speed capacitance type motor, and the fan
blower adopt forward curved blades centrifugal galvanized steel
fan blower which is dynamic and static balance
tested;
4. 3mm*5mm
thick Washable nylon filter is factory standard, aluminum
filter is optional; Return air plenum can be selected to
factory built-in or not;
5. High
quality carbon steel plate drain pan insulated by 5mm PE.
is factory standard; stainless steel drain pan and **0mm
extended drain pan are optional;
6. High
quality brass coil header, bleeding valve is factory built in
on each header, and the protect mounting bracket is
factory installed as standard to protect header not easily to
be damaged during tube connection to the
header.
Ceiling Floor
FCU
(1) Cabinet is made of
ABS plastic and front galvanized steel
(2) 2pipe
3rows, 2pipe 4rows, and 4pipe 3*1rows are
available
(3) Pipe
connection can be changed at site (from left connection changed to
right connection), this helps to save stock cost
(4) 2 Pipe
unit can be changed into 4 pipe unit at site
(5) The
decorative unit can be changed to concealed type by removing the
cabinet
Features
â—Ž Multiple
functions:
1)
Pipe connection can be changed at site If you have left pipe
connection unit in stock, and if your customers wants
Right connection
unit, you can remove out the coil from the unit and put back
oppositely as above sketch
A
2)
2 Pipe unit can be changed into 4 pipe unit at site. If you have
2 pipe unit in stock, then you can mount one
additional hot
water coil onto the main cooling coil, then it will become 4 pipe
unit as above sketch
B
3)
Remove the cabinet (4 screws on the top and 2 screws at the
bottom) ,then the unit will become without concealed
type. sketch
C
â—Ž Casing
is made of ABS plastic and front galvanized steel; Top grill
is has fixed louvers and is reversible in order to
distribute the air in two different directions; No screws
to fix the grills which makes it is easy to remove the
grills from the unit; Hidden boxes are reserved at
left and right side of cabinet for thermostat
installation
â—Ž The
water coil adopts OD9.*2mm seamless copper tube and blue fin
expanded together, coil is tested in factory performance test
lab under 2.8MPa to guarantee the
performance;
â—Ž Adopt
single phase three speed capacitance type motor, and the fan
blower adopt forward curved blades centrifugal galvanized steel
fan blower which is dynamic and static balance
tested;
â—Ž The
external drain tray is general used for vertical or
horizontal installation which makes stock more easier
and more
saving.
â—Ž High
quality brass coil header, bleeding valve is factory built in
on each header, and the protect mounting bracket is
factory installed as standard to protect header not easily to
be damaged during tube connection to the
header.
4way Cassette
FCU
(1) Except 4way
Cassette, we also have 1way, 2way and 8way Cassette
models
(2) 2pipe
and 4pipe models are available
(3) The
panel is made of white ABS plastic; Casing is made of high quality
zinc coated aluminum, adopts EPS material overal foaming and bonded
to the drain pan
(4)
External drain tray is optional
Features
â—Ž The
Casing is made of high quality zinc coated aluminum. It adopts
EPS material overal foaming and bonded to the drain
pan. The
condensate area are double insulated
â—Ž Front
panel is made of white ABS plastic, with 4 way air supply
and intake grill
â—Ž Adopts
Integral type "C" shape design of heat exchanger, made
of high quality φ 9.*2 mm copper tube and high efficient
hydrophilic coated aluminum fin
â—Ž Condensate
drain pan adopt blister process and can be bond together with
high condensity EPS foam drain pan at an organitic whole after
heated. The drain pan and EPS foam both adopt anti-fire
material
â—Ž Condensate
drain pump adopts intelligent high lift condensate water drainage
pump can make the water height of **0 mm
â—Ž Adopts 3D
large dip angle spiral blades and rolling bearing motor, and
there is anti vibration devices are adopted under
motor
â—Ž Automatic
swing: the operation of 4 pieces of swing louvers are controlled
by separately four stepping motors
â—Ž Fresh
air inlet can be reserved: fresh air from outdoor can be
introduced into room which improves the indoor air
quality
| 国: |
China |
| モデル番号: |
FP, HFP, TMM. TMA, KM4
|
| 离岸价格: |
80 ~ 300 / Piece ( Negotiable ) （交渉可能）
Get Latest Price
|
| ロケーション: |
China |
| 最低注文量の価格: |
80 per Piece |
| 最低注文量: |
200 Piece |
| パッケージの詳細: |
By carton box |
| 納期: |
20-35days |
| 供給能力: |
20000 Piece per Month |
| 支払いタイプ: |
T/T |
| 製品グループ : |
- |
