Industrial Horizontal Powder Mixer Powder Mixing Machine Powder Blender

タイトルまたは説明

Special Plough Mixer
Working principle
The model is composed of four parts: transmission mechanism, horizontal cylinder and plow Throwing Knife;Under the action of the plow, the materials move convective along the cylinder wall. When the materials flow through the flying knife, they are thrown by the flying knife rotating at high speed, so as to achieve uniform mixing in a short time.It can meet most solid-liquid mixing, wet granulation, drying and other composite processes;It is especially suitable for the mixing of viscous or colloidal additives.
Features
1. Driving advantage
The standard products are driven by cycloidal reducer with belt pulley. Compared with the large torque of gear reducer, the elastic connection of belt transmission has the advantage of protecting transmission parts in case of overload.
2. Throwing Knife action
During high-speed operation, the plow evenly distributed in the cylinder can not only disperse the materials axially, but also carry the animal materials to flow along the circular cylinder. The flying knife in the middle plays the role of auxiliary mixing and dispersion and depolymerization of caked materials.
3. Throwing knife shape and speed
The flying knife group of multi-layer blade is directly connected with the motor, and the standard speed is generally ***0r / min;According to the difference of material characteristics, the flying knife has a variety of shapes and speeds.
4. Atomizing nozzle
An atomizing nozzle can be added above the flying knife to realize liquid mixing. Because the aggregation density of materials at this position is small under the cutting of the flying knife, the atomized liquid material is easier to enter and mix with the powder material.
5. Negative pressure feed
The square door opened on the side of the cylinder can be used for observation and cleaning. The standard type is equipped with sealing gasket and the latch is fastened;Travel switch can be added.
6. Discharging mode
This type of mixer can also be made into a continuous mixer. The residence time of materials in the cylinder can be controlled by adjusting the opening size of the discharge valve, so as to control the mixing uniformity.
Advantages:
1.It is suitable for materials with great difference in specific gravity and large powder particles;
2.It is applicable to the mild mixing process of powder materials and will not press feed or break the material particles;
3.No overheating of heat sensitive materials;
4.In the process of mixing powder and powder, it is very convenient to add liquid required by working conditions or set up one or more spray port devices.
5.The bottom dislocation valve is convenient for discharging. Since there is no fixed device at the bottom of the screw, there will be no pressure feeding
Technical Parameter