Industrial Weightless Powder Mixer Powder Mixing Machine Powder Blender

タイトルまたは説明

Introduction
The weightless double shaft paddle mixer has the characteristics of strong and high efficiency. The mixing time is short. The design mixing time is 1 ~ 3 minutes, and the uniformity of 1:***0 delivery ratio is greater than *5%;The two mixing shafts in the horizontal cylinder rotate reversely at the same speed, and the paddles arranged at a special angle on the shaft ensure the radial, circumferential and axial three-way throwing movement of materials to form a composite cycle and achieve uniform mixing in a very short time.
Structural features
1.Mixing effect
Even if there are differences in specific gravity and particle size of materials, good mixing effect can be achieved under the rapid and violent tossing and sprinkling of staggered mixing blades.
2.Crushing device
In case of agglomeration of materials, a crushing device shall be added. The "crushing rod" with triangular gear cover shall maintain a high speed of more than ***0rpm to crush and depolymerize the agglomerated materials in the weight loss area of materials.
3.Discharge form
The discharge form is generally pneumatic (manual) flap valve, and the arc valve is closely embedded in the cylinder and flush with the inner wall of the cylinder, without material accumulation and mixing dead angle;The standard type can be divided into large door and small door. The opening of the large door is to the side of the cylinder, which can discharge materials cleanly and quickly with less residue.
4.Two blade
In order to reduce the replacement cost of vulnerable parts of the equipment, the blade can be made into two pieces, and a movable small blade can be padded on the blade base to directly replace the worn small blade, which is economical and fast.
5.Clearance between blade and cylinder
The gap between the blade and the cylinder wall directly affects the mixing effect and the material residue in the body after discharging;The clearance between the blade and the cylinder of our company's products is controlled at 3 ~ 5mm.
6.*0Cubic meter full volume
This series of mixer can achieve a maximum volume of *0 cubic meters. For large-scale equipment, the transmission form and mixer base are very different from ordinary specifications.

Technical parameters