Li-SOCL2 Batteries

タイトルまたは説明

3.6V Primary lithium-thionyl chloride
(Li-SOCl2) Energy Type
Bobbin Cell
For low drain/long term operating
applications requesting superior
voltage response in **5˚C ～+ *5˚C
environments
Cell size references 1/2UM**1/2R**1/2AA
Alternative models LS****0/LST****0/LS****0C/TL***2/TL***2/SB-AA*2/XL**0F
Electrical characteristics
(Typical values relative to cells stored for one year or less at **0ËšC max.)
Nominal capacity 1.2Ah
(At 0.5mA **0ËšC,2.0V cut off.The capacity restored varies according to current,temperature,cut off)
Open circuit voltage(At *0ËšC) 3.*6V
Nominal voltage (At 0.5mA **0ËšC) 3.6 V
Pulse capability:Typically up to **0mA (**0mA/0.1second pulses draind every 2min at *0ËšC
from cells with *0μA base current,yielding voltage readings above 3.0V.The readings may
vary according to pulse characterics,temperature and cell’s previous history.Fitting the cell
with a capacitor may be recommended in severe conditions.Consult ACT if necessary)
Max. continuous current (at **0ËšC) *0mA
Typical Max. continuous current (at **0ËšC) **0mA
Storage (recommended) **0ËšC(**6ËšF)Max
Operating temperature range **5ËšC~**5ËšC
(High and low temperatur will lower the capacity and load voltage.) **6ËšF~***5ËšF
Physical characteristics
Diameter(Max) *4.5mm(0.*5in)
Height(Max) *5.2mm(1in)
Typical weight *0g(0.**7oz)
Available terminal suffix radial tabs,radial pins,axial leads,flying leads