Mifare RS232 RFID Card Reader

タイトルまたは説明

Specification

• ·       Wiegand *6bits/ Wiegand*4bits /ABA Standard Format Data Output
• ·       Less than 0.2 second Response Speed
• ·       Less than 0.5 seconds Proximity Time Distance:
• ·       ***5cm Proximity Range
• ·       Support UEM ***0 ID Card or compatible with it( *4bits, Manchester Code) or Mifare 1 Card (*3.*6 MHz Frequency)
• ·       **5℃ to *5℃Ambient Temperature,*0%**0%Ambient Humidity
• ·       Built-in Antenna
• ·       Built-in LED (Double Color LED)
• ·       Built-in Loud Speaker (Buzzer)
• ·       DC *2VWorking Voltage,*0mA Working Current
• ·       **0 Meters Communication Distance
• ·       Real Time Data Transfer
• ·        Dark GreyColor
• ·       PVC Case Material (Black Resin for Water-Proof Function)
• ·        *0mm**2mm**2.5mm***8C

Installation 

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

• Red       DC 5V**6V
• Black      GND
• Blue        D1
• White       D0
• Brown       BEEP
• Green       LED
• Yellow      Alarm

Notice

1. Confirm the electric voltage (DC*2V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than *0m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.