Instructions/application
recommendation of painting system:
1,make sure all the surfaces are
clean,dry and free from wax,grese,oil,etc;
2,For bare wood,sand it down in
the direction of the grain until it’s smooth.Start with *0#
sandpaper,and then **0# and finally **0#. Use clean cloth to
remove dust between sandings.
3,If you are using paint as the
topcoat over another finish,sand the existing finish first with
steel wool or synthetic steel wool.
4,Apply a thin coat of paint on
the wood and allow it to dry completely.After the first coat is
dry,sand it lightly with fine abrasive paper to remove any
raised grain.
5,Brush or spray another coat of
paint and allow it to dry.
6,Continue to apply coats of paint
until you achieve the surface build-up that you desire.
7,Check the finish to see whether
there are small nicks or imperfections.Rub out any rough spots
with (synthetic) steel wool. Wipe with a clean tack cloth to
remove dust. For extra protection, polish the surface with wax
or furniture polish.
1,hardeners not needed to ensure your health;
