タイトルまたは説明

Original GM Tech2 with Candi Diagnostic Gm Tech2 Scanner

It has 2 extra adapter: SAAB and Opel.

Mutlilanguage for Choose: English, Spanish, Portuguese, Korean etc. For other languages, please contact us.

GM Tech*2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems ***2 to ***1

Features:

Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
Support for on-board diagnostics on all GM systems ***2 thru current year.
Removable hardware modules provide insurance against scan tool obsolescence.
Large, easy-to-read backlit screen.
RS**2 & RS**5 ports provide the avenue to connect future devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional
The authentic GM ****-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

Vetronix Tech*2 Specifications

Dimensions
*2?6?2?

Microprocessor
*2 bit, *6 MHz

Memory
*2 MB flash type II PCMCIA. Type III slot available for future expansion.

Communications
Integral RS**2 communication port.

Screen
3.8?2.8? backlit monochrome with full graphics capability: *****0 pixels. Displays up to 9 vehicle parameters at once
GM Tech*2 Starter Kit with Candi Module & TIS Kit includes (All ORIGINAL and NEW!):

Tech*2 Flash Tester
*2 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet download ( **9.2 kb )
GM aftermarket Expertec TIS software on DVD-ROM disks
TIS***0 dongle to access SPS/Security features
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
*2V Cigarette Lighter Power Cable
SAE *6/*9 Adapter
NAO *2/*9 Adapter
Battery Power Cable
Storage Case
Tech*2 Users Manual
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.