あなたはまだ TradeKey.com のメンバーではないようです。 今すぐサインアップして、世界中で700万を超える輸入業者および輸出業者と接続します。
今すぐ加入、無料 |
Book call on your favorite time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services


Pavement marking paint (Cold Plastic)

China

05

1800 ~ 2000 / Ton ( Negotiable ) Get Latest Price

China

1800 per Ton

5 Ton

25kg/barrel

15-30 days

10000 Ton per Year

T/T, L/C

-

今すぐお問い合わせください

製品仕様

Main Raw Material : Acrylic Usage : Road Marking Paint Application Method : Spray State : Liquid Coating Brand Name : Jiuda CAS No. : - Other Names : - MF : - EINECS No. : -
white : yellow

タイトルまたは説明

Introduction
High quality solvent road marking paint is an economical marking paint. Due to its low construction cost per unit area, rapid drying, high construction efficiency and strong application, it is widely used in urban roads and general roads in China, including urban roads, national roads, provincial roads, pedestrian crossings, and residential parking lots.
General Quality Solvent Road Marking Paint also as known cold paint (whilte/yellow).
Solvent-based road marking paints with acrylic resin as the main hair mask material, using high-air spraying equipment construction scribing, solvent evaporation to form a marking layer.
 
 
Advantage:
*  The construction speed is quick ,the construction equipment is simple,the construction cost is low
*  Keep a good light & color of marking and make the marking bright and clean
*  Tough film
*  Anti-water & anti-acid and also not easy to be contaminated with grease and asphalt
 
 
Construction method:Brush application & spraying application
 
Consumption Actual consumption depends on the roughness of  Pavement 
  Solvent road marking paint
Thickness 0.2mm(Dry film)
Consumption of paint 0.4kg/
 

Technical indicators:
 
Non-stick tire dry time: ≤10Min
Anti-slip value  ≥15BPM
Drying time standard thickness single coating, 25 ° C,
 
Pencil hardness ≥HB
Adhesion ≤ 2 (circle method, level)
Impact strength 50kg·cm
Bending test  ≤1mm
Water resistant for 7 days no bubbles
Wear resistance ≤0.1g
Package 25kg/barrel
 

Technical Data:
·Curing time:10minutes
Color:White/Yellow /Customize other colors
 
Typical installation areas:
·Low grade highway
·Small city streets with small traffic
·Residential district, factory road
·Temporary and rapid refurbishment Road
 
Attention of construction
1.  Before construction, the pavement should be cleaned, with the exception of dust and dirt to ensure the adhesion and adhesion of the paint and the pavement
2.  During construction, the temperature should be kept above 0 ℃
3.  It is strictly forbidden to carry out construction on wet pavement
 
 
 

お問い合わせ

連絡先担当者:Mr. Lee

会社:Shanxi Zhongtu Traffic Technology Co., Ltd

住所:Xian, Shaanxi, China,

To,

Mr. Lee < Shanxi Zhongtu Traffic Technology Co., Ltd >
私は知りたい:

他のサプライヤーからのより多くの製品

Thermoplastic Road Marking Paint Thermoplastic Road Marking
glass beads for road marking paint glass beads for road
TITANIUM DIOXIDE (TiO2) ANATASE sinochem2016 TITANIUM DIOXIDE (TiO2)
MMA Two-Component High-light Pavement Marking material (MMA Cold Plastic) MMA Two-Component
WHITE HOT-MELT ROAD MARKINGS WHITE HOT-MELT ROAD
Hot Melt Paint Thermoplastic Road Marking Paint Power Road Paint Hot Melt Paint
Luminous Road Mark Paint Luminous Road Mark Paint
weather resistant traffic epoxy hot melt road marking paint weather resistant traffic
C5 Aliphatic Hydrocarbon Resin Used in Road marking Paint SH-288S C5 Aliphatic Hydrocarbon
C5 Petroleum resin for road marking paint C5 Petroleum resin for road
ROAD MARKING PAINT (SB95Y) ROAD MARKING PAINT (SB95Y)
DY-BAAM Big-size Air-auxiliary Road Marking Equipment DY-BAAM Big-size
Petroleum Hydrocarbon C5 Petroleum Hydrocarbon C5
Paint for road marking Paint for road marking
glycerol glycerol
C5 Aiphatic Hydrocarbon Solvents Resin for Road Marking Paint C5 Aiphatic Hydrocarbon