SHAIC HT-330 Heat Shrinkable Tape

タイトルまたは説明

SHAIC HT***0is a hand wrapped heat shrinkable tape designed for corrosion protection of straight pipes, fittings,

bends, elbows and other irregular configurations. It has a cross-linked polyethylene backing coated with butyl rubber

based thermoplastic adhesive. When heated, the backing layer shrinks and the adhesive flows and forms a reliable

corrosion protection seal onto metal and adjacent coating surfaces.

SHAIC HT***0needs no primer nor patch closure and reduces application time and labour costs.

Long-term Corrosion Protection

After heating, formed corrosion protection seal and strong backing provides outstanding waterproofing effect and high chemical resistance.

SHAIC HT***0resists impact, abrasion and ultraviolet light. Excellent resistance against cathodic disbondment,

dielectric breakdown.

Simple Application

No Special skills, equipments, patch closure nor primer are needed. Its superior flexibility provides easy and reliable

application for irregular configurations of fittings, bends and elbows and small diameter of straight pipes.

Wrap spirally the tape over foreign matters-free and pre-heated surface, beginning at least *5~*0mm (1~2)

onto pipe coating.

Wrap the tape with enough tension to obtain conformability and with minimum *0% of overlapping,

while removing the release liner.

Warm the end part of the tape and press down firmly. Using a torch, start at the edge of the tape and heat

circumferentially around the coated pipe. Finish off by heating over the entire tape vertically to

ensure a uniform adhesion and by using a roller or gloved hands to remove wrinkle and air.

SHAIC HS***0is a heat-shrinkable wraparound sleeve designed for corrosion protection of field-welded joints of

plastic coated steel pipelines. It has a thick cross-linked polyethylene backing coated with butyl rubber based

mastic sealant or hot melt adhesive. Hot Melt or Mastic shall depend on project requirements. When heated the

backing layer shrinks and the sealant flows and forms a reliable corrosion protection seal onto metal and adjacent

coating surfaces.

Cut Sleeve is normally supplied with separate Patch Closure, which is coated with a high shear-strength

adhesive; however, there are different types and sizes to comply with individual requirements. It is supplied in bulk

rolls as well, and has super-heavy duty, heavy duty and regular thickness.