タイトルまたは説明

The shipbuilding gantry crane is of gantry / goliath crane with such properties as large hoisting capacity, large span, muti-function, high efficiency and so on. Which can be used in shipyard to transport vessel sections, joint and turn over the ship block.

Main technical characteristics as below:
1. it can be used for single hoisting, combined hoisting, turn over of ship sections;
2. the gantry can be single beam and double beam for your selection, and the main girder was optimization designed to be change-section to use material more reasonable;
3. the rigid leg of gantry can be single column and double column for your requirements;
4. there are double hook on the upper trolley located in the outer side of main beam, which can move about 0~2m seperatly or simultancly;
5. the lower trolley has main hook and aux. hook located under the middle of main girder;
6. the upper trolley and lower trolley can cross through each other freely in service condition;
7. all the hoisting mechanism and moving mechanism were controlled by inverter;
8. the maintenance crane with capacity of *0t is located on the main girder and the side of rigid leg to facilite inspect and maintenance work of upper trolley and lower trolley;
9. there are elevator inside the rigid leg to facilite accessible of operator and maintenance worker;
*0. the reliable rail clamp, tie-down, ground anchor and other anti-wind devices were supplied to protect it against the storm.

Please let me konw the detailed technical specification of the crane before you place the RFQ that we can designed and do related work correspondingly, Thank you!