SN74LVC1T45 Single-Bit Dual-Supply Bus Transceiver

タイトルまたは説明

this single-bit noninverting separate bus transceriver uses 2 This single-bit noninverting  separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.*5 V to 5.5 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.*5 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.*-V, 2.*- V, 3.*-V, and *-V voltage nodes. The SN*4LVC1T*5 is designed for asynchronous communication between two data buses. The logic levels of the direction-control (DIR) activate either the B-port outputs or the A-port outputs. The device transmits data from the A bus to the B bus when the B-port outputs are activated and from the B bus to the A bus when the A-port outputs are activated. The circuitry is always active on both A and B ports and must have a logic HIGH or LOW level applied to prevent excess ICC and ICCZ. The SN*4LVC1T*5 is designed so that the DIR is powered by VCCA. This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The VCC isolation feature is designed so that if either VCC is at GND, then both ports are in the high-impedance state. NanoFree package technology is a major breakthrough in IC packaging concepts, using the die as the package