タイトルまたは説明

Description: Pre-heated solar water heater also relies on the natural circulation of water between the collector and the tank (that is tubes absorb solar energy, and heats the water inside the tube, hot water rises, cold water flows down). It differs from compact non-pressurized solar water heater because it gets a copper coil inside the inner tank. The hot water rises from the tube into the tank, and heats the copper coil and finally heats the water inside the copper coil . Therefore the water tank is just as heat storage tank. so the hot water we use is actually from the copper coil, it is more clean, and even drinkable(as the copper can purify the water.).The whole system also works at 0.2MPA. Necessary parts: Tank( with a copper coil inside), the vacuum tube bracket optional parts: A controller- show water level, temperature for the convince of cold water supply Assistant tank- fill water in time constantly An electric heater- when without sunshine , etc: in rain days and winter days, use for heating water. 1. TANK Outer tank material: High quality painted steel plate(white color) thickness 0.4mm; Inner tank material: SUS****2B food grade stainless steel plate thickness 0.5mm; Heat preservation time: *2 Hours; Superior heat preservation: high density polyurethane foam insulation layer thickness *5mm; Copper coil: diameter 2mm, thickness 0.8mm. Holes: 4 holes, water inlet and outlet, electrical heat element, vent. 2. Vacuum tube Model: *8mm ***0mm, double layer concentric borosilicate tempered 3.3 glass.