タイトルまたは説明

Composition of the system: Split Pressurized solar water heater is composed of solar collector (heat pipe), pressurized water tank, pipeline, working station (including circulation pump, controller, expansion vessel, pressure gauge, sensors and etc). Brief introduction: Water tank and solar collector are separated, the collector can be put on balcony or slope roof. And the water tank can be located at any corner in your room. With an intelligent controller and solar working stations, the whole system works automatically. This split pressurized solar water heater takes advantage of high absorption and low emittance of vacuum tubes and converts absorbed radiation into heat energy and sends it rapidly to collector by Super-conductive Heat Pipe conductor. It can work efficiently in four seasons. Advantages: 1) Highly efficient absorber of high performance with daily average efficiency over *0% ( 3) No water inside the evacuated tubes; the solar water heater can still in service even with several tubes breakage 4) Highly efficient insulation with polyurethane foam 5) easy to assembly and install Specifications Tank capacity(L): ******0 Tube specification(Diameter x Length) (mm): Heat pipe *8 x ***0 Tube quantity: ****0 Tube vacuum degree: 5 x ***3 Tube absorption >0.*8 Tube heat loss <0.*8 Tube heat transfer power: ****0Kw/m2 Working pressure(MPa); 0.6 Anti freeze(C): **0 Anti ice drops(Diameter mm): *0 Tube start working temperature(C) <*5 Lighting Area (Made by Alum alloy) (m2): 3.4 Anti-wind support frame (stainless steel): *6.5m/s *0 grade Inner tank specific:(mm): **0 x ***4 Thickness of z tank (mm): 1.8 Material of outer tank: steel coated with AL & Zn Insulation (mm): polyurethane *5mm Color of caps on the side of the tank: Black Heat element(fitted in the water tank): ***0W/**0V/*0Hz Controller: *0 C ***0 C Dimensions of inlet and outlet of water: G1/2 Heat preservation: *2hours