Jiangyin Spark Electronic Technology Co., Ltd

Input Current: 100A-200KA; Measuring current: 5%-100%; Output form:4-20mAdc(three-wire); Bandwidth: 10HZ-1KHZ; Load:

ApplicableStandards &nb...

ApplicableStandards &nb...

ApplicableStandards &nb...

Input Current: 500A-100KA; Measuring current: 5%-100%; Output form:RS485 Modbus-Rtu; Frequency:50/60HZ; Accuracy:

Input Current: 100A-200KA; &n...

Product Description Split-Core AC Current Transformer current Sensor XH- SCT-T10(B) 10mm Opening With 5 To 80 Amp Rating Description: Jiangyin Sp

LMK1(BH)-0.66 type current transformer is mainly used indoors for electric energy measurement or relay protection in AC circuits rated 0.66kV and belo

Rated input current from 5A to 400A 0.333V AC output at rated current Accuracy 1% Epoxy encapsulated housing Accuracy at 10% to 130% of rated current

Measured current range:

Primary Current:1-10A; Secondary Current:1-10mA; Accuracy: 0.2; Phase Error:

Maximum continuous primary current 120 AAC Output: mA or 0.333 Volt at rated current Current Ratio: 500:1, 1000:1, 2000:1, 2500:1, 3000: 1 Maximum Pri

Jiangyin Spark XH-SCT-S24 Clamp on current senses AC current from 50 to 300 Amps passing through the center conductor.Clamp on CTs are Clamp and split

Jiangyin Spark XH-SCT-S24 Clamp on current senses AC current from 50 to 300 Amps passing through the center conductor.Clamp on CTs are Clamp and split

Jiangyin Spark XH-SCT-S24 Clamp on current senses AC current from 50 to 300 Amps passing through the center conductor.Clamp on CTs are Clamp and split

1. Rated input current from 5A to 600A 2. 0.333V AC or other mA , mV output at rated current 3. Accuracy 0.5% or 0.1% 4.Insulation Voltage:5400V, CATI

1. Rated input current from 5A to 600A 2. 0.333V AC or other mA , mV output at rated current 3. Accuracy 0.5% or 0.1% 4.Insulation Voltage:5400V, CATI

Maximum continuous primary current 120 A AC Output: mA or 0.333 Volt at rated current Current Ratio: 500:1, 1000:1, 2000:1, 2500:1, 3000: 1 Maximum Pr

1. Epoxy resin wrapped package, high dielectric strength 2. Core is ferrite, silicon steel or permalloy, reliable performance Working environment 3. A

Capable of accommodating arange of primary conductor sizes. Characterized by high sensitivity, accuracy, linearity, minimum phase shift. Suitable for

Low cost. Split core design;safer, easier installation, portable. Specifications Rated Current 5A to 3000A loads. Rated output: 0.333Vac Accuracy:1% f

Specification of Jiangyin Spark clamp ct split core current transformer Rated Current 5A to 3000A loads. Rated output: 0.333VAC Accuracy: 1% from 5%

Maximum continuous primary current 300 A AC Current Ratio: 3000: 1 Output: 0.333 Volt at rated current Accuracy: 1% from 5% to 120% of rated current

Split Rogowski Coil current sensors are designed for fast and easy installation on existing primary conductors/ BUS bars. The split design permits non

1. Epoxy resin wrapped package, high dielectric strength 2. Core is ferrite, silicon steel or permalloy, reliable performance Working environment 3. A

Capable of accommodating a range of primary conductor sizes. Characterized by high sensitivity, accuracy, linearity, minimum phase shift. Suitable

Maximum continuous primary current 100A/250A/500A Secondary turns: 3000 or as per customer datasheet current transformer output: 50mA Wire leads: 24#

Feature Low cost. High accuracy. Epoxy resin casting encapsulation Good seismic resistance Convenient for installation High permeability magnetic mate

Product Description Specifications Of Split-Core Flexible Rogowski Coil CT/Split-Core Flexible Rogowski Coil Current Transducer Rogowski coil sensor

Product Description Rogowski Coil Flexible Current Transformer Split Rogowski Coil current sensors are designed for fast and easy installation on exis

Product Description Specifications OfRC-1000 1000A 10mV Flexible Rogowski Coil Current Probes 1.Coil length 0.2m-2m 2.input current100A-100KA 3. Outp

Basic Info. Model NO. XH-SCT-T16 Insulating Medium Insulating Paper Installation Active Type Magnetic Circuit Structure Single Stage Type Voltage Tran

Basic Info. Model NO. XH-SCT-T24-200 Insulating Medium Insulating Paper Installation Extension Type Magnetic Circuit Structure Combined Type Voltage T

Product Description Features: Small size High accuracy Wide linear range Good consistency PCB mounted or lead terminal 50 standard sizes are available

Product Description Feature: 1. Epoxy resin wrapped package, high dielectric strength 2. Core is ferrite, silicon steel or permalloy, reliable perform

Product Description Flexible Rogowski Coil Jiangyin Spark FCT is flexible, like rope , it is designed to use where solid or split core current transf

Product Description Split Rogowski Coil current sensors are designed for fast and easy installation on existing primary conductors/ BUS bars. The spli