HONGKONG TRUEYES TECHNOLOGY LIMITED

The CANFiber-100 is used for the conversion of the CAN signal from copper wire (ISO 11898-2) to fiber optic cables.

The TD301DCAN is an isolated controller area network (CAN) physical layer transceiver with an integrated isolated dc-to-dc converter. The TD301DCAN co

TD301D485H/TD501D485H is an isolated RS-485 Transceiver . The devices combine isolators between the bus-line transceiver and the logic-level interface

LK-6000 embedded device servers was created to provide manufacturers with a competitive embedded serial-to-Ethernet solution.

CANBridge-100 Repeater creates a connection between two High-speed CAN busses with galvanic isolation of up to 3 kV.The module is suitable for use in

CANWiFi-600/622 enables the wireless transmission of CAN data with a high data throughput between various CAN networks or a CAN network and a WLAN/LAN

ACPCI Series CAN interface board supports the Universal PCI interface. The ACPCI includes ACPCI-251(1 CAN port), ACPCI-252(2 CAN ports) and ACPCI-254

The ACUSB compact is a portable , low-cost, active CAN interface for connection to the USB bus. The ACUSB includes ACUSB-131B(1 CAN channel) and ACUSB

The ACNET gateway connects a PC, a embedded PC or other general device to a CAN bus via the TCP/IP network protocol (Ethernet).

With the CANRS-100, devices with a serial RS-232&RS-485 port can be connected to the CAN bus.Data sent by means of RS232/RS485 is packed in CAN telegr