Shanghai China Petroleum Instrument Co., Ltd

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

The Company leading prducts GeoGuide Wireless MWD instrument can be adapted to 6", 8-1/2", 12-/4", 17-1/2" four kinds of well hole

A platinum resistance is used to work as a temperature indicator, the corresponding relationship between Rt and T is listed in the below given table

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

Mud conductivity sensor is used to measure the conductivity within the mud, Refer to the manual book of the specific conductivity sensor being used.

CPS-YG Fluorescence Analyser adopts wave-length of 3650A ultraviolet spectrum to illuminate matters, which will reflect different flouresence's ph

In mud logging operation, the content of gas detracted from drilling fluid affects analyzing sample gas directly. The common floater or electric motor

Two types of mud density sensor are provided in WELLSTAR, One is mud density andtemperature integrated, the other is an independent mud density sensor

Adopt positive pulse signal generator, pulse controlled driving part inside the string reciprocating motion, change the pulse the top of the mushro

Adopt High precision measurement sensor (magnetometers, gravity meters), Can be inclination, Azimuth, Tool face, magnetic inclination, down hole

The interface box transmission parameters, according to a certain format on the monitor for on-site driller operator to obtain down hole measurem

In MWD / LWD directional well construction, depth measurement point system for tracking the depth of the measured parameters and measuring point

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

The general Idea is that pressure vibrations are transmitted into a standard 4-20 mA DC output signals. SSP sensor Specifications: * SPP range: 0~40

A draw work sensor is consisted of one rotor and one stator and two subminiature hor pulse probes are embedded in the groove of stator 90 angle way. W

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

In MWD / LWD directional well construction, depth measurement point system for tracking the depth of the measured parameters and measuring point

The controlled potential electrolysis principle is applied on the H2S sensor.Three electrodes installed in the electrolytic cell, which are workingele

WOH sensor is a pressure transmitter in fact. The general Idea is that Pressure Vibrations and transmitted into a standard 4-20 mA DC Output signals.

Electromagnetic Torque Sensor There are three types of torque sensors used in mud logging system, mechanical torque sensroe, electromagnetic sensor o

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

SPM/RPM sensor is an inductance device actually. The main idea is that when a metal stuff moving close to an inductor, signals are generated and count

Size: 8.5m(8.9 with Skid Bottom) x2.6m x 2.6m; (dimension could be designed by customer's Demand) Total Weight: 12~14T(with equipments) Input:3 ph

Adopt High precision measurement sensor (magnetometers, gravity meters), Can be inclination, Azimuth, Tool face, magnetic inclination, down hole

In MWD / LWD directional well construction, depth measurement point system for tracking the depth of the measured parameters and measuring point

Adopt positive pulse signal generator, pulse controlled driving part inside the string reciprocating motion, change the pulse the top of the mushro

In mud logging operation, the content of gas detracted from drilling fluid affects analyzing sample gas directly. The common floater or electric motor

CPS-YG Fluorescence Analyser adopts wave-length of 3650A ultraviolet spectrum to illuminate matters, which will reflect different flouresence's ph

A platinum resistance is used to work as a temperature indicator, the corresponding relationship between Rt and T is listed in the below given table

Mud conductivity sensor is used to measure the conductivity within the mud, Refer to the manual book of the specific conductivity sensor being used.

An Ultrasonic pit level sensor is an ultrasonic level monitor combining sensor and electronics in a single package. It is designed to measure liquid

The MFO Sensor is a target type flow meter. Based on the continuity principle of drilling fluid and bemoulli equation and the force analysis of the ba

CPS-KQ-VI fast gas chromatograph is the sixth generation of gaschromatograph which is successfully developed by shanghai china petroleuminstrument co

WOH sensor is a pressure transmitter in fact. The general Idea is that Pressure Vibrations and transmitted into a standard 4-20 mA DC Output signals.

The controlled potential electrolysis principle is applied on the H2S sensor.Three electrodes installed in the electrolytic cell, which are workingele

Electromagnetic Torque Sensor There are three types of torque sensors used in mud logging system, mechanical torque sensroe, electromagnetic sensor o

SPM/RPM sensor is an inductance device actually. The main idea is that when a metal stuff moving close to an inductor, signals are generated and count