UNIVETERNITY MACHINERY COMPANY LIMITED

Productive Technology Avarietyofaluminum silicatefiber plate is produced by taking silicate fibercotton asraw materials through vacuum filterprocess,

The on-line degasser is designed to remove the hydrogen and other harmful impurity in the molten metal. It is located between the holding furnace and

The configuration of this melting furnace is as follows: 1. The type of this melting furnace is regenerative and natural gas reflective. The furnace

The function of the casting line is to convert the raw material charge into a coil of strip cast alloy suitable for cold rolling. The process of the c

Alumina Ceramic Foam Filters mainly used for filtration of aluminum and alloys in filter case .With the excellent corrosion resistance to molten alumi

During casting process, the temperature control is an important factor for obtaining a good castings. In order to control the optimum melt pouring tem

During aluminum and aluminum alloy smelting process, the hydrogen produced by chemical action with steam diffuse in molten aluminum, which will cause

Al Continuous caster using launder Ceramic launder, refractory material, launder, heat-resistance transfer channel, Launder is a channel, normally

Cold rolling mill can roll the aluminium cast coils or hot rolled coils of thickness 6~8mm down to the finished products of thickness 2~0.05mm after s

Al Continuous caster using aluminum silicate caster tip caster tip, refractory material, ceramic tip Caster tip is the key consumption part of the wh