Dealong Mould

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC

28mm PET preform mould without tails specification: 1.28mm PET preform mould without tails neck finishes:38mm, 30/25, 29/25, 26/22, 1810, 1881, 1716 e

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC

Taizhou Huangyan Daelong Mold Co., Ltd.(Taizhou Huangyan Hengyuan Mold & Plastic Factory) early from the establishment, Is devoted to all kinds of Pre

Taizhou Huangyan Daelong Mold Co., Ltd.(Taizhou Huangyan Hengyuan Mold & Plastic Factory) early from the establishment, Is devoted to all kinds of Pre

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC

1.1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as

5 gallon cap mould specification: 1.5 gallon cap mould core, cavity steel:ASSAB S136 and Austria M310 2.5 gallon cap mould core sleeve steel: Japan DC

wide mouth preform mould specification: 1.wide mouth preform mould core, cavity and neck screw steel: Germany 2316 2.wide mouth preform mould base ste

48 cavities preform mould with valve gate specification: 1.48 cavities preform mould with valve gate neck finishes:38mm, 30/25, 29/25, 26/22, 1810, 18

48 cavities preform mould with valve gate specification: 1.48 cavities preform mould with valve gate neck finishes:38mm, 30/25, 29/25, 26/22, 1810, 18

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC

1.Needle Valve of No-Cutting PET Preform Moulds 2.The number of PET preform mould cavities is up to 72 cavities for standard neck finishes, such as PC