BASE SKIM COAT

タイトルまたは説明

U*1 base skim coat is a good cushion for the compressive stress between different wall surfaces. It applies on leveling both interior and exterior cement or concrete surfaces which is ragged so that to reduce the usage of top coat and project cost. Features 1. Applied as a base layer prepared for top coat 2. Low maintenance, economical 3. Impervious to termites 4. Good bonding to substrates 5. Moisture and mould resistant 6. Cost effective 7. Non-toxic Surface preparation The solid substrate should be clean, dry and free of oil, grease, wax, latex compounds, curing compounds, dust and all foreign matter. Application 1.With right amount clear water (approximately 3.3:1) furnishing clay shape 2.According to its, first pours into the clear water stirs in the feeding trough, then joins the powder material, then stirs the even non- pellet paste with the electrically operated mixer to stick the shape, settles several minutes slightly to do again stirs, the effect is better 3. Evenly spreads with the putty the glue wipes in the basic plane, its thickness control in 1.5~ 2mm 4. After *4 hours do solidly, only then carry on the surface layer putty the construction. 5. Do not add water into the cured putty and reuse it. Precautions 1. It should not be directly applied on gypsum plaster, metal, rubber, PVC, wooden, earth based chip plate, gas concrete, and under floor heating, painted or tiled surfaces. Contact with the company for other solutions. 2. Avoid the use of excessive moisture during application. 3. Do not apply on concrete surfaces before 7 days set-time. 4. Do not work below 5 degree or below *0 degree. 5. On interior application, openings in the building (windows, doors, ect.) should be covered to avoid excessive wind which could cause premature dry-out. Coverage: **5kg/m2 Color: grey/ white Remark Main ingredient: concrete polymer, hydrophobic Package: *5kg/bag Package: *5kg/bag Storage: shelf life is minimum 1 year when stored in covered and dry environment.