waterborne-road-marking-paint

タイトルまたは説明

Waterborn pavement marking paint (Cold Plastic)
Introduction：
The product uses water as the solvent and Avecia® Neocryl A***3 water emulsion resin as the base material. It is sprayed with high-pressure airless spraying equipment, and the glass beads are sprayed on the surface, and the cross-linking reaction occurs during the evaporation of the solvent to form the marking coating.
Color:White/Yellow /Customize other colors
 
Advantage:
 
*  Normal temperature construction;
 
*  High solid content and low VOC;
 
*  Environmental protection;
 
*  Can spread the glass beads to the surface.
Feature
Safety: It is environmentally friendly, non-toxic, non-flammable, and requires no heating during construction.
Construction: It can be sprayed into a film at a time, and the construction is simple. The equipment can be rinsed with water.
Adhesion and wear resistance of paint: It is more delicate, and it should be used with caution when the road conditions are risky. It is mostly used for overcoating marking lines, or for roadside lines and places with small traffic.
Glass bead adhesion and reflective effect: the adhesion of the beads is good, and the nighttime reflection effect is lasting.
Stain resistance: good self-cleaning, rain water can be restored. It can be directly recoated directly on the old wire (including hot melt and solvent).
Recoatability: Direct recoating directly on old wires (including hot melt and solvent).
Energy consumption: no heating, less energy consumption.
Overcoating cycle: 6~*2 months
 
 
Construction method:Spraying application
Color:White/Yellow /Customize other colors
 
Typical installation areas:
· Mainly used in city road
· Scenic highway
· Airport runway etc.
 
Attention of construction
1.  Before construction, the pavement should be cleaned, with the exception of dust and dirt to ensure the adhesion and adhesion of the paint and the pavement
2.  During construction, the temperature should be kept above 0 ℃
3.  It is strictly forbidden to carry out construction on wet pavement
4.  During construction,it is prohibited to long time and high speed to stir the paint.