Shanghai Well-Sun Precision Tool Co ., Ltd

ADVANTAGES: 1. Antibacterial. 2. No clogging. 3. Resistance of acid, alkali and heat. 4. Improvement of c

Flute�Size:�Large�Φ6.60mm/Small&i

� We are offering Cone Carbide Bits: This�slimï¿&fra

Flute Size: Φ2.35mm Overall Length: 38.1mm Shank: 3/32"(2.35mm) ADVANTAGES: 1. Antibacterial. 2

With their revolutionary cut and safe-end working part, the newgolden speed series of carbide bit with gold

The safety carbide bit does not have any cutting flutes on the tip of the bit. Safe to autoclave or li

Cut out the white. Uses a cross-cut medium carbide bit to cut out the free edge in her pink-and-white back

The�advantages�of��Ceramic

Cross Cut Flute Length: 14.5mm Flute Size: Φ2.35mm� ADVANTAGES:ï&

This bit is used for surface work, shortening and backfill cutting. - The only difference is the size of t

We can make very fine nail drill bits, with 16; 20; 25; 32; 36; 60：80teeth, and also 100 teeth

Flute Size:Φ6.00mm Overall Length: 51mm Shank: 3/32"(2.35mm)� ADVAN

It's made in China from resin bonded aluminum oxide abrasive then glued to cloth paper, available in fine

The under nail cleaner is a thin shank carbide bit. The carbide is cut into a plain shank with a new safety

Flute Size: Φ1.60mm Overall Length: 38.1mm or 45mm Shank: 3/32"(2.35mm) ADVANTAGES: 1

Flute Size: Φ6.00mm Overall Length: 51mm Shank: 3/32"(2.35mm)� ADVA

LEFT HANDED PERSON USED BITS This bit is used for surface work, shortening and backfill cutting. Flute&i

All bits have a 3/32" shaft. We have five sizes with the holder drum: 5mm/7mm/10mm/13mm/16mm And the sa

LEFT HANDED PERSON USED BITS Flute Size:Φ6.00mm Overall Length: 51mm Shank: 3/32"(2.35mm

Cross Cut Flute Length: 14.00mm Flute Size: Φ6.00mm� ADVANTAGES:ï