Reach Forging & Stamping Corp.

Progressive die stamping with additional riveting process, medium high level product.

Aluminum alloy ***5T6, cold forging with additional threads turning process.

Cold forging progressive die stamping, part thickness 4.0mm, pivot post 5.0mm, 3.0mm long, concentricity

Cold rolled steel 1.0mm thick, progressive die drawing process, safety part with wall thickness and strength r

Progressive die stamping, center post 2.5mm, 4.5mm long, perpendicularity 0.1mm, positioning 0.2mm, te

Carbon steel, fine blanking edge quality with minimun die roll.

0.3mm thick, progressive die stamping, safety concern part with strength requirements.

Progressive die cold forging stamping with additional threads turning.

Progressive die stamping and cold forging process.

Progressive die stamping, material ***5T6.

O.D. *5mm, progressive die stamping, acting as a clutch.

Special head features done by drawing, lots of tiny features, *5mm long, *1mm wide, material thickness 0.8mm

High strength Cr-Mo steel, inner and outter profiles with fine blanking quality, progressive die forming,

Aluminum alloy ***5T6, cold forging with additional threads turning process.

Aluminum alloy ***5T6, cold forging progressive die stamping.

Aluminum alloy ***5T6, inner and outer profiles with fine blanking edge quality, material thickness 8.5mm.

Titanium alloy , Progressive die stamping with additional riveting process, very high end product.