Description
M-ABS**5XX******2 Series
(ABS, filament material; **5, filament diameter is 1.*5mm; XX,
color in short; **0, recommended printing temperature at deg C)
e.g.
M-ABS**5MW******2 (Milky White)
Application Facility
Kinsuntek KPM Series and other verified printers
(FDM)
Material
ABS plastic (verified by Kinsuntek)
Diameter
1.*5mm，standard tolerance is no more than
+/*0.*5mm
Net wet
1kg/roll
Packaging Type
roll
Printing Temperature
**0 - **0 ℃
Recommended Printing Temperature **0 ℃
Recommended Printing Speed *0 –
*0mm/s
Color
White, Black, Gray, etc (base on
stock color)
KinSunTek ABS Filament is the best and most consistent filament for
KinSunTek Desktop 3D Printers with ABS material.
ABS material features
High strength, good toughness, easy to print, and one of the mostly
applied polymer plastics in the industry
Strong anti-corrosive capability;
Very good molding effect;
Surface is bright and clean, easy to dyeing and electroplating
Comprehensively quality tested at both ***-micron and ***-micron
layer resolutions on the KinSunTek KPM Series to verify that the
filament will perform every feature that KinSunTek Desktop Software
offer.
If you're new to 3D printing, KinSunTek PLA Filament is a good
material to start with because it's easy to use and performs well
on most prints.
KinSunTek PLA Filament adheres well to acrylic and to KinSunTek
other printing platform..
Prints with a large bottom layer may have a tendency to curl. To
prevent curling, use rafts.
Store KinSunTek PLA Filament in a cool, dry place as it can absorb
moisture from the air and lon-term exposure to humidity can
compromise filament quality and performances.
Be sure your build plate is lever, clean and oil-free before
printing.
