10/100/1000M PoE(PSE) Media Converter

タイトルまたは説明

Key Features

• *0/**0/***0Base-TX UTP to ***0Base-FX fiber media convertion.
• IEEE**2.3af PoE PSE compatible.
• 9K bytes packet at cut-through mode
• Built-in AC/DC power supply.
• Over-current protection.
• choice of SC, BiDi or other connectors for multimode and singlemode.
• DIP switch to set different configurations.
• LFP (Link Fault Pass-through) support

     FR**0 series is a *0/**0/***0Base-TX to ***0Base-FX (also can be forced to **0Base-FX) media converter, which allows two types of network segment to be connected easily. Complied with IEEE**2.3af standard, the AC/DC powered PoE media converter is a Power Sourcing Equipment (PSE) which combines data transfered over a fiber optic link with *8V (or other voltage) power supply, providing power to IEEE**2.3af powered device (PD) over CAT5 UTP cable (cable length up to **0meters / **0feets). The converter includes a single port PSE controller, which offers PD signature sensing and power monitoring features. Other features include over-current protection, LFP function. The LFP (Link Fauit Pass-through) allows the media converter to monitor both the fiber and copper RX port for loss of signal. In case of a loss of RX signal on one media port, the converter will automatically disable the TX signal to the other media port, thus passing through the link fault.

Technical Specifications:

Data Rates:
- *0/**0/***0Mbps
  (IEEE**2.3U IEEE**2.3z ***0Base-Tx)
- ***0Mbps (***0Base-FX) or
  **0Mbps (**0Base-FX)

Input Power Requirements:
- Input voltage ........................... **0 VAC to **0 VAC
- Input frequency ................................. *7 Hz to *3 Hz

Power over Ethernet Output:
- Pin Assignment and Polarity……1/2 (V+),3/6 (V-)
  or/and 4/5(V+),7/8 (V-)
- Output Power…..please refer to ordering information
- Efficiency ....................................................*5% min
- Short circuit protection........................ auto recovery
- Over current protection ....................... auto recovery

nvironmental Conditions:
- Operating temperature ....................... 0℃ to *0℃
- Cooling ........................................ free air convection
- Storage temperature ...................... **0℃ to **5℃
- Operating Humidity …… *0% max, non-condensing

Mechanical Specifications:
- Case Material……………Iron
- Case Color………………………………….Black
- Net Weight…………………….**0g approx. / unit
- Dimensions………**0(W) x *0(H) x **0(L) (mm)
                      Do not include transceiver length

Connectors:
- AC Inlet…………IEC-J*4
- LAN………………Shielded RJ**5
- Fiber………………see ordering information

Ordering Information:

*XX-XXX: supports optic connector / fiber type and distance. For more details, please refer to the list below or contact us.