タイトルまたは説明

FOSPP***0L1I is a high performance, cost effective modules, which is supporting Multi Rate 4.***2Gbps to *0.***5Gbps, and transmission distance up to 1.4km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a ***0nm FP laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and a Limitting Amplifier. The module is hot pluggable into the **-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal **0Ohms differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level of TX_DIS. Transmit Fault (Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the *-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.

Features

• Up to1.4km transmission on SMF
• Support Multi Rate 4.***2Gbps to*0.***5Gbps
• ***0nm FP laser and PIN receiver
• SFI electrical interface
• *-wire interface for integrated Digital Diagnostic monitoring
• SFP+ MSA package with duplex LC connector
• Hot pluggable
• Very low EMI and excellent ESD protection
• *3.3V power supply
• Power consumption less than 1.0W
• Operating case temperature: **0~**5°C

Applications

• High-speed storage area networks
• Computer cluster cross-connect
• Custom high-speed data pipes
• LTE optical repeater application

Compliance

•  
  Compliant with IEEE **2.3ae****2
•  
  Compliant with MSA SFF****2
•  
  Compliant with MSA SFF****1