CWDM SFP 1.25G 10km dual Fiber 1530nm LC

タイトルまたは説明

Fibra Optica CWDM SFP 1.*5G GE *0km ***0nm Dual Fiber LC Optical Transceiver For CATV FTTH Field
 

Description

YXF-GE-C*3L**0D is a high performance, cost effective modules, which is supporting up to 1.*5Gbps, and transmission distance up to *0km on SM fiber. The transceiver consists of two sections: The transmitter section incorporates a laser driver and a CWDM DFB laser. The receiver section consists of a PIN photodiode integrated with a transimpedance preamplifier (TIA) and a Limitting Amplifier. The module is hot pluggable into the **-pin connector. The high-speed electrical interface is base on low voltage logic, with nominal **0Ohms differential impedance and AC coupled in the module.

The optical output can be disabled by LVTTL logic high-level of TX_DIS. Transmit Fault (Tx_Fault) is provided to indicate that the module transmitter has detected a fault condition related to laser operation or safety. Loss of signal (RX_LOS) output is provided to indicate the loss of an optical signal of receiver. A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the *-wire SFP Management Interface. This interface uses a single address, A0h, with a memory map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area while specific data is held in a series of tables in the high memory area.

Features

l Up to 10km transmission on SMF

l Up to 1.*5 Gbps data links

l CWDM DFB laser and PIN receiver

l *-wire interface for integrated Digital Diagnostic monitoring

l Hot pluggable

l Very low EMI and excellent ESD protection

l *3.3V power supply

l Power consumption less than 1.0W

l Operating case temperature: 0~**0°C

Applications

l High-speed storage area networks

l Computer cluster cross-connect

l Custom high-speed data pipes

Compliance

l Compliant with IEEE **2.3Z

l Compliant with MSA SFF****2

l Compliant with SFP MSA