Fiber Optic Fusion Splicer

タイトルまたは説明

Features
Core to core alignment by PAS technology
 ( PAS:Profile Alignment System)
Digital fusion splicer with automatic focus function
Fiber core can be display clearly
Single X or Y view and X & Y view simultaneously
Auto detect cleaved endface fault
Display fiber cleaved and offset angle
Display core and clad offset
5.6 inch TFT color LCD monitor with clear digital image display
USB & VGA interface
Software upgrade via USB interface
 
Specefications

Model    RT***0T
Applicable fibers    SM (ITU-T G.**2), MM (ITU-T G.**1), DS (ITU-T G.**3), NZDS (ITU-T G.**5)
Fiber cleaved length    *2~*6mm（Coating diameter：**0?m）   
*6mm（Coating diameter: **0 ~ ***0?m）
Fiber diameter    Cladding diameter：*0 ~**0?m
 Coating diameter：**0~ ***0μm
Fiber Count    Single
Fiber aligning method    Core or clad aligning
Image processing method    Digital
Actual average splice loss    0.*2dB （SM）, 0.*1dB (MM),
 0.*4dB (DS), 0.*4dB( NZDS)
Splicing time    Typical 9 sec，with standard SM fiber
Splicing mode    *3(templet), *0(user)
Splice loss estimate    More accurate
Return loss    ＞*0dB
Storage of splice result    ***0 results，*0 parameter per result
Fiber display and magnification    **0X（X or Y view）, **0X（X and Y view）
Tube heating time    Typical *0 sec
Tube heating mode    9(templet), *4(user)
Tube heating temperature    Can be adjusted
Applicable Protection sleeve length    *0mm, *0mm and a series of micro sleeves
Tension test    2N
Electrode life    ***0
***** splice/heating with battery    Typical **0 cycles (splice/tube heat) with inner Li-battery
Display screen    5.6 TFT inch color LCD monitor
Image change over    The fiber image is turned upside down
Terminals    USB 1.1 and VGA
Operating condition    0 ~ ***0m above sea level, 0 ~ *5%RH and **0～*0℃, respectively, Max. wind velocity of *5m/s
Power supply    AC ******0V with AC adapter; inner Li-battery(***0mAH)
Dimensions    **0mm(L) x**0mm (W) x**0mm (H)
Weight    2.7 Kg excluding battery, 3.2 Kg including battery