タイトルまたは説明

Molybdenum oxide new calcination technology
Product introduction:
Molybdenum oxide is calcined by using rotary internal combustion calcination equipment, it is the technical improvement for the reverberatory furnace and burning kiln. Several sets of the equipment have been using this technology recovery rate can be more than *8%, the product conforms to the national standard.
Working principle
Molybdenum oxide internal combustion calciner could dry molybdenum sulfide and the water content reaches 5 percent with the direct coal burning, coal gas and natural gas as the heat source by using rotary internal combustion. Molybdenum sulfide will be sent into the rotary kiln for calcination. After calcination of molybdenum oxide will be discharged from kiln tail.
Performancecharacteristics:
1. After the calcination of molybdenum oxide, the residual sulphur content can be up to standard requirements, tons of molybdenum oxide in coal consumption can reach **0 ~ **0 kg/ton.A single kiln to produce molybdenum oxide up to ***0 tons/year, the service life of 5 ~ *0 years.
2. Use internal combustion calcined with corresponding exhaust gas recycling, molybdenum oxide recovery can be as high as *9% above.
 
Technical specifications:
1. kiln should be *8 ~ *8 meters long with the annual output of ***0 tons of molybdenum oxide.
2. The kiln diameter 1.5 ~ 1.8 m
3. Molybdenum sulfide use Side drying machine as the drying method.
4. The exhaust gas recycling use bag catcher