离岸价格
Get Latest Price8.99 ~ 12.58 / ( Negotiable )
|200 Kilogram Minimum Order
国:
China
モデル番号:
E630
离岸价格:
8.99 ~ 12.58 / ( Negotiable )Get Latest Price
ロケーション:
-
最低注文量の価格:
8.99
最低注文量:
200 Kilogram
パッケージの詳細:
5kg/drum, 20kg/drum, 25kg/drum, 200kg/drum
納期:
3-5 days after receiving the bank receipt
供給能力:
8000 Kilogram per Day
支払いタイプ:
T/T, L/C, D/A, D/P, Western Union, Money Gram, PayPal
製品グループ :
連絡先担当者 Ms. JoJo
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong
cast stone statues mold making silicon casting
Description of cast stone statues mold making silicon casting
Our E630 mold making silicon castingis featured with almost nil shrinkage and perfect fluidity; Without releasing any by-product with low molecular weight, and it's cured fully from top to bottom, from the inside and outside simultaneously, so it will be deeply-cured. The E sereise addition cured silicone will not meet the problem of degradation or sticky molds because of the existence of by-product of small molecules under certain conditions, (such as closed, high temperature).it's very ideal material for moldmaking and casting, such as stone concrete molds, cement molds, statue molds, reproduction for crafts or toys, and so on. The cured mold can be reused for hundreds of times, without transformation and distortion. Its durability is so strong that it sells very well in the global markets.
Typical Applications of cast stone statues mold making silicon casting
Our E630 mold making silicon casting can be
used in not only the field of common RTV 2 part moldmaking
silicone. As the vulcanizing reactions of addition cure silicone is
fundamentally different from tin cure silicone’s, it has no problem
of deep vulcanizing or reverse reaction, or other problem.
Therefore, our addition cure silicone is particularly applicable
for plaster silicone molds, cement product mold, other molds even
with big size, and so on. It features with lower viscosity, high
strength , good fluidity, so it can also be very suitable for the
replication for the models with precision and complex pattern. From
the following information, you will get a full view of its
performance.
Characteristics of cast stone statues mold making silicon casting
-almost nil shrinkage
-high chemical resistance to aggressive components of some types of resins
-good tear strength (this feature ensures higher resistance to wearing and shearing)
-high degree of precision in reproduction
-high dimensional stability over time and non-deformability
-high resistance to high temperature and aging(resist -60 to 200°C)
-excellent non-stick effect
-food grade silicone (environmental,odorless and nontoxic)
Technical Parameters of cast stone statues mold making silicon casting
Model |
E630 |
Appearance |
Liquid |
Color |
Translucent |
Mixing ratio |
1:1 |
Operating time (mins ) |
30-50 |
Curing time(hours 25 0C) |
6-8 |
Hardness (A°) |
28±2 |
Density ( g/cm 3 ) |
1.13 |
Viscosity (Mpas -25 0C) |
9000±2000 |
Tensile-strength(kgf/cm2 ) |
≥60 |
Tear-strength (kgf /cm ) |
≥20 |
Elongation-break(%) |
≥ 400 |
Retractility(%) |
≤0.1 |
Shelf life (month) |
≥12 |
Please note: the above data for this product in 25°C temperature, 55percent humidity conditions, for reference. The accurate data is measured by customers when using.)
OPERRATING INSTRUCTION of cast stone statue mold making silicon casting
1.Stir part A and part B with right mixing ratio evenly. (E630# is 1:1) and get the mixture for vacuum-pumping.(If there is no vacuumizer,you can just pour the mixture slowly from the corner so that less bubbles caused).
2.Enclose the product (the original model) with four plastic plates or wooden plates.
3. Clean your products and brush a layer of release agent(detergent or soap water) on your product.
4.Pour the mixture with correct mixing ratio into the model frame.
After about 2-4 hours, when the silicone cured, get out the original model, and there you get a finished
addition cured silicone mold .
Frequently asked questions:
Why is the silicon mold oily?
The molding silicone rubber itself doesn’t contain any oil, so it won’t be oily. If the mold is oily, it may be because you add the compound silicone oil( the compound of silicon oil and white oil). The white oil is not silicon oil but a kind of petrochemicals.
Twelve (12) months from date of shipment when stored at 24°C in original unopened packages.
PACKAGE of cast stone statues mold making silicon casting :
Packed in clean 25kg/pail, 200kg/pail.
国: | China |
モデル番号: | E630 |
离岸价格: | 8.99 ~ 12.58 / ( Negotiable ) Get Latest Price |
ロケーション: | - |
最低注文量の価格: | 8.99 |
最低注文量: | 200 Kilogram |
パッケージの詳細: | 5kg/drum, 20kg/drum, 25kg/drum, 200kg/drum |
納期: | 3-5 days after receiving the bank receipt |
供給能力: | 8000 Kilogram per Day |
支払いタイプ: | T/T, L/C, D/A, D/P, Western Union, Money Gram, PayPal |
製品グループ : | platinum cure silicone rubber |